128 products
Seagate Barracuda 72.9k 250GB 7.2K SATA
ST3250824AS
Regular price $50.00 $57.50 incl GST Save $-50.00Barracuda 7200 hard drives from Seagate provide a wide range of capacities, fast performance and superb reliability, all at an excellent value. They are top storage choices for any ATA-based applications, including mainstream and high-performance PCs, low-cost servers and RAIDs, PC gaming systems and media PCs.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 250 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA II |
Type: | HDD |
Storage drive buffer size: | 8 MB |
HDD number of heads: | 16 |
HDD number of cylinders: | 16383 |
Read seek time: | 8 ms |
Write seek time: | 9 ms |
Average latency: | 4.16 ms |
Bytes per sector: | 512 |
Start/stop cycles: | 50000 |
Power: | |
Operating voltage: | 5 / 12 V |
Start-up current: | 2.6 A |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating altitude: | -60.96 - 3048 m |
Non-operating altitude: | -60.96 - 12192 m |
Operating shock: | 63 G |
Non-operating shock: | 350 G |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 580 g |
Seagate 300GB 3G SAS 15K LFF 15K.6 Enterprise HDD
ST3300655SS
Regular price $175.00 $201.25 incl GST Save $-175.00Features:
15K RPM spindle speed
Delivers more I/O's per second and faster sustained transfer rates than 10K 3.5-inch drvies, enabling the same high performance to be met with fewer drives.
Background Media Scan (BMS)
Second generation Seagate-exclusive BMS proactively scans the media for potential defects during drive idle time. It enables incipient errors to be corrected before data is lost.
Perpendicular Recording
Perpendicular recording is fundamentally superior, enabling the highest areal density with 30 percent higher performance.
Nonrecoverable Error Rate
The nonrecoverable error rate has been improved by a factor of 10.
Idle Read After Write (IRAW)
Seagate-exclusive IRAW enhances data protection by verifying-during drive idle time-that data in the drive buffer was properly written.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 300 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 16 MB |
Average latency: | 2 ms |
Windows operating systems supported: | ✓ |
Linux operating systems supported: | ✓ |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating altitude: | -60.96 - 3048 m |
Non-operating altitude: | -60.96 - 12192 m |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 25.4 mm |
Depth: | 46 mm |
Weight: | 771 g |
Other features: | |
Acoustic pressure emissions: | 36 dB |
Seagate 146GB 3G SAS 15K LFF HDD
ST3146855SS
Regular price $145.00 $166.75 incl GST Save $-145.00Features:
15K RPM spindle speed
Delivers more I/O's per second and faster sustained transfer rates than 10K 3.5-inch drvies, enabling the same high performance to be met with fewer drives.
Background Media Scan (BMS)
Second generation Seagate-exclusive BMS proactively scans the media for potential defects during drive idle time. It enables incipient errors to be corrected before data is lost.
Perpendicular Recording
Perpendicular recording is fundamentally superior, enabling the highest areal density with 30 percent higher performance.
Nonrecoverable Error Rate
The nonrecoverable error rate has been improved by a factor of 10.
Idle Read After Write (IRAW)
Seagate-exclusive IRAW enhances data protection by verifying-during drive idle time-that data in the drive buffer was properly written.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 146.8 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 16 MB |
Average latency: | 2 ms |
Windows operating systems supported: | ✓ |
Linux operating systems supported: | ✓ |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating altitude: | -60.96 - 3048 m |
Non-operating altitude: | -60.96 - 12192 m |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 25.4 mm |
Depth: | 46 mm |
Weight: | 771 g |
Other features: | |
Acoustic pressure emissions: | 32 dB |
Seagate 2TB 6G SATA 7K2 LFF ES.2 Enterprise HDD
ST32000645NS
Regular price $375.00 $431.25 incl GST Save $-375.00- Highest-capacity enterprise drive, up to 4TB for maximum density server and storage solutions
- Perfect for reliable, 24×7 bulk data storage
- Predictable 7,200-rpm performance even in the most rugged multi-drive SAS or SATA environments
- Best-in-class energy efficiency with low power and cooling requirements
- Protect your data and ease data disposal costs and management with the SED FIPS 140-2 option
Supersize your storage
The Constellation ES.3, with the world’s highest capacities in a 3.5-inch HDD form factor, is the perfect foundation for building maximum density server and storage solutions. These capacity-optimized hard drives support up to152TB of storage per square foot for a great return-on-investment for your enterprise storage.
Reliable bulk data storage for a 24x7 world
Building high capacity RAID storage solutions requires predictable and consistent performance. With the Constellation ES.3, we take it a step further and ensure your data is reliably stored in multi-drive chassis solutions.
Boost your storage capacities – and conserve power
Storing massive amounts of unstructured data is easy and smart with the Constellation ES.3. Designed with best-in-class energy efficiency, it uses a minimum power and cooling envelope to store up to 152TB per square foot.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 2000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA III |
Component for: | NAS |
Storage drive buffer size: | 64 MB |
Read seek time: | 8.5 ms |
Write seek time: | 9.5 ms |
Average latency: | 4.16 ms |
Bytes per sector: | 512 |
Mean time between failures (MTBF): | 1200000 h |
Power: | |
Power consumption (typical): | 10.68 W |
Power consumption (idle): | 7.7 W |
Operating voltage: | 5 / 12 V |
Start-up current: | 2.11 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Non-operating vibration: | 4.9 G |
Operating shock: | 70 G |
Non-operating shock: | 300 G |
Weight & dimensions: | |
Width: | 101.8 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 655 g |
Other features: | |
Data transfer rate: | 6 Gbit/s |
Seagate 2TB 3G SATA 7K2 LFF ES Enterprise HDD
ST32000644NS
Regular price $310.00 $356.50 incl GST Save $-310.00Specs | |
Features: | |
HDD capacity: | 2000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA II |
Type: | HDD |
Storage drive buffer size: | 64 MB |
HDD sustained transfer rate: | 140 MiB/s |
Read seek time: | 8.5 ms |
Write seek time: | 9.5 ms |
Average latency: | 4.16 ms |
Bytes per sector: | 512 |
Mean time between failures (MTBF): | 1200000 h |
Power: | |
Power consumption (read): | 9.03 W |
Power consumption (write): | 7.8 W |
Power consumption (idle): | 6.39 W |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Operating vibration: | 0.25 G |
Non-operating vibration: | 4.9 G |
Operating shock: | 70 G |
Non-operating shock: | 300 G |
Weight & dimensions: | |
Width: | 101.8 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 710 g |
Packaging data: | |
Quantity: | 1 |
Seagate 1.2TB 6G SAS 10K SFF EP Enterprise HDD
ST1200MM0007
Regular price $390.00 $448.50 incl GST Save $-390.00The Seagate Enterprise Performance 10K HDD V.7 (formerly Savvio® 10K.7) is an ideal upgrade. It delivers best-in-class performance, the high capacity and low power that data centres crave and need to meet demanding service level agreements, keep up with data growth and reduce IT operating costs.
The Savvio® 10K.6 hard drive enables OEMs, system builders and data centres to:
- Improve data centre storage efficiency.
- Enhance reliability with advanced media management technology.
- Built-in security at no extra cost.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 1200 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Storage drive buffer size: | 64 MB |
SMART technology: | ✓ |
Power: | |
Operating voltage: | 5 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Other features: | |
Data transfer rate: | 6 Gbit/s |
Seagate 1TB 3G SAS 7K2 LFF HDD ST31000640SS (OEM Data Domain)
ST31000640SS
Regular price $135.00 $155.25 incl GST Save $-135.00Key Features and Benefits
- Perpendicular recording technology for maximum capacity
- 24x7 operation and 1.2 M hrs. MTBF
- Dynamic power saving using Seagate PowerTrim™ technology
- Broad spectrum rotational vibration tolerance at 12.5 rads/s2
- Error recovery control - quick error resolution to prevent system timeouts
- Workload management to ensure operational reliability
- Quick and robust download with firmware security checks
- Write Same command for efficient RAID initialization
- Idle Read After Write data integrity checking
- 16-MB cache
- Low total cost of ownership
- 5-year limited warranty
Specs | |
Features: | |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 16 MB |
Read seek time: | 8.5 ms |
Write seek time: | 9.5 ms |
Average latency: | 4.16 ms |
Mean time between failures (MTBF): | 1200000 h |
Power: | |
Power consumption (typical): | 13 W |
Power consumption (idle): | 10.2 W |
Start-up current: | 3 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating vibration: | 12.5 G |
Operating shock: | 63 G |
Non-operating shock: | 300 G |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 530 g |
Other features: | |
Acoustic pressure emissions: | 0.27 dB |
Seagate 146GB 3G SAS 15K LFF HDD
ST3146356SS
Regular price $145.00 $166.75 incl GST Save $-145.00Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 146.3 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 16 MB |
HDD number of heads: | 3 |
Read seek time: | 3.4 ms |
Write seek time: | 3.9 ms |
Average latency: | 2 ms |
Power: | |
Power consumption (typical): | 14.4 W |
Power consumption (idle): | 9.6 W |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating vibration: | 1 G |
Non-operating vibration: | 2 G |
Operating shock: | 60 G |
Non-operating shock: | 250 G |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 25.4 mm |
Depth: | 146.1 mm |
Weight: | 674 g |
Seagate 300GB 6G SAS 10K SFF 10K.6 Enterprise HDD (ST300MM0026)
ST300MM0026
Regular price $80.00 $92.00 incl GST Save $-80.00Savvio® 10K.6 is an ideal upgrade. It delivers best-in-class performance, high capacity and low power that data centers crave and need to meet demanding service level agreements, keep up with data growth and reduce IT operating costs.
The Savvio® 10K.6 hard drive enables OEMs, system builders and data centers to:
- Improve data center storage efficiency
- Enhance reliability with advanced media management technology
- Built-in security at no extra cost
Improves drive storage efficiency
Transition from slower, underperforming (or larger form factor drives) to the smaller, faster and best-in-class Savvio 10K.6 hard drive.
With higher capacities and a smaller footprint, data centers can store and access data faster than ever, enabling them to keep pace with data growth while optimizing scarce IT real estate. Lower power consumption reduces energy and cooling costs.
The latest Savvio 10K.6 drives:
- Deliver up to 21% faster sequential performance than previous generation
- Store up to 50% more data than even the highest-capacity 3.5-inch, 15K HDDs
Enhances HDD reliability
Savvio® 10K.6 advanced media management technology improves drive reliability and data integrity.This sixth-generation Savvio hard drive lets you rest easier knowing your storage devices will perform as expected. The Savvio 10K.6 drive is the first mission-critical HDD to offer a Seagate® RAID Rebuild™ technology option, making RAID recovery faster and safer.
Protect data with built-in security
Seagate Enterprise Performance 10K drives are self-encrypting and can be used as normal drives or as part of a more secure solution at no extra cost. Built-in security and Protection Information features enable companies to protect valuable data, comply with regulatory mandates, and reduce risk to brands and reputations. Seagate Instant Secure Erase reduces the time required to overwrite a drive from hours to less than a minute-making drive retirement safe, fast and easy.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Storage drive buffer size: | 64 MB |
HDD number of heads: | 2 |
Average latency: | 2.9 ms |
Bytes per sector: | 512 |
Windows operating systems supported: | ✓ |
Mac operating systems supported: | ✓ |
Linux operating systems supported: | ✓ |
Power: | |
Power consumption (idle): | 3 W |
Operating voltage: | 5 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 95% |
Storage relative humidity (H-H): | 5 - 95% |
Operating vibration: | 0.5 G |
Non-operating vibration: | 3 G |
Operating shock: | 40 G |
Non-operating shock: | 400 G |
Weight & dimensions: | |
Width: | 70.1 mm |
Height: | 15 mm |
Depth: | 100.5 mm |
Weight: | 217 g |
Other features: | |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
Number of products included: | 1 pc(s) |
Seagate 1TB 6G SATA 7K2 LFF ES Enterprise HDD
ST1000NM0011
Regular price $145.00 $166.75 incl GST Save $-145.00The Seagate® Enterprise Capacity 3.5 HDD V.3 (formerly Constellation® ES.3) delivers the scalability that data centres need to reliably meet their demanding growth of unstructured data.
- Highest-capacity enterprise drive, up to 4TB for maximum density server and storage solutions
- Perfect for reliable, 24×7 bulk data storage
- Predictable 7,200-rpm performance even in the most rugged multi-drive SAS or SATA environments
- Best-in-class energy efficiency with low power and cooling requirements
- Protect your data and ease data disposal costs and management with the SED FIPS 140-2 option
Supersize your storage
The Constellation ES.3, with the industry's highest capacities in a 3.5 inch HDD form factor, is the perfect foundation for building maximum density server and storage solutions. These capacity-optimised hard drives support up to152TB of storage per square foot for a great return-on-investment for your enterprise storage.
Reliable bulk data storage for a 24x7 world
Building high capacity RAID storage solutions requires predictable and consistent performance. With the Constellation ES.3, we take it a step further and ensure that your data is stored reliably in multi-drive chassis solutions.
Boost your storage capacities – and conserve power
Storing massive amounts of unstructured data is easy and smart with the Constellation ES.3. Designed with best-in-class energy efficiency, it uses a minimum power and cooling envelope to store up to 152TB per square foot.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA |
Storage drive buffer size: | 64 MB |
Read seek time: | 8.5 ms |
Write seek time: | 9.5 ms |
Average latency: | 4.16 ms |
Mean time between failures (MTBF): | 1200000 h |
Power: | |
Power consumption (typical): | 6.40 W |
Power consumption (read): | 7.42 W |
Power consumption (write): | 6.21 W |
Power consumption (idle): | 4.42 W |
Operating voltage: | 5 / 12 V |
Start-up current: | 1.88 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating vibration: | 0.25 Gs |
Non-operating vibration: | 4.9 Gs |
Operating shock: | 70 G |
Non-operating shock: | 350 G |
Weight & dimensions: | |
Width: | 101.8 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 610 g |
Other features: | |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
Sustained data rate: | 150 MB/s |
Acoustic pressure emissions: | 2.7 dB |
TOSHIBA 250GB 1.8'' SATA HD
MK2533GSG
Regular price $75.00 $86.25 incl GST Save $-75.00Weighing only 62 grams and designed to withstand up to 1,500Gs of non-operating shock, these light weight and durable drives provide an ideal solution for today’s demanding mobile applications. The small footprint and large storage capacity of the MKxx33GSG Series are well-suited for a variety of on-the-go computing needs, including laptop PCs, mini-notebooks, printers, and external add-on storage applications.
Specs | |
Features: | |
HDD size: | 1.8" |
HDD capacity: | 250 GB |
HDD speed: | 5400 RPM |
Storage drive buffer size: | 16 MB |
HDD number of heads: | 4 |
Track to track seek time: | 3 ms |
Average seek time: | 15 ms |
Average latency: | 5.6 ms |
Power: | |
Power consumption (standby): | 0.18 W |
Power consumption (read): | 1.3 W |
Power consumption (write): | 1.3 W |
Power consumption (idle): | 0.4 W |
Operating voltage: | 3.3 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 65 °C |
Operating vibration: | 2 G |
Non-operating vibration: | 5 G |
Operating shock: | 500 G |
Non-operating shock: | 1500 G |
Weight & dimensions: | |
Width: | 54 mm |
Height: | 8 mm |
Depth: | 78.5 mm |
Weight: | 62 g |
Other features: | |
Power requirements: | 3.3V±5% |
Internal: | ✓ |
Data transfer rate: | 3 Gbit/s |
USB powered: | ✗ |
Acoustic pressure emissions: | 18 dB |
HDD number of plates: | 2 |
Fujitsu 73GB 10K 2.5in SAS HDD
MBB2073RC
Regular price $70.00 $80.50 incl GST Save $-70.00- 2.5-inch Enterprise Hard Disk Drives offer 10K RPM spindle speed and feature storage capacities up to 147GB.
- More performance per U — up to 24 2.5-inch HDDs in a 2U system.
- Mean-time-between-failure (MTBF) of 1,400,000 power-on hours.
- Best in Class power consumption at idle vs. competitive 2.5-inch 10K SAS HDDs.
- Ideal for mission critical server and storage system applications.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 73.5 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 16 MB |
HDD interface transfer rate: | 3 Gbit/s |
HDD number of heads: | 2 |
Read seek time: | 4 ms |
Write seek time: | 4.5 ms |
Track to track seek time: | 0.2 ms |
Average latency: | 2.99 ms |
Bytes per sector: | 512 |
Mean time between failures (MTBF): | 1400000 h |
Power: | |
Operating voltage: | 5 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 95% |
Storage relative humidity (H-H): | 5 - 95% |
Operating shock: | 100 G |
Non-operating shock: | 400 G |
Weight & dimensions: | |
Width: | 69.8 mm |
Height: | 15 mm |
Depth: | 100.5 mm |
Weight: | 220 g |
HGST 1TB 3G SATA 7K2 LFF Enterprsie HDD
HUA721010KLA330
Regular price $80.00 $92.00 incl GST Save $-80.00The Ultrastar™ A7K1000 delivers up to one terabyte of storage capacity in a standard 3.5-inch form factor, filling a vital need for high-density storage in the enterprise. As the third generation design, based on the popular Deskstar™ E7K500, the Ultrastar A7K1000 continues to set the standard in enterprise-class reliability and performance for enterprise and nearline applications requiring high-capacity storage. With a unique 5-platter design, Hitachi has relaxed the bit densities to achieve higher reliability. The Ultrastar A7K1000 is built using the industry’s most reliable perpendicular magnetic recording (PMR) recording heads and media.
Performance targeted for the enterprise
The Ultrastar A7K1000 features a 3 Gb/s SATA interface supporting key features in the Serial-ATA specification including Native Command Queuing (NCQ), staggered spin-up and hot-swap capability. The Ultrastar A7K1000 allows for configuration scalability and with the same physical connector as Serial Attached SCSI (SAS) drives, it’s ideal for use in mixed-drive environments.
In multi-drive environments, rotational vibration, which results from the vibration of neighboring drives in a system, can degrade hard drive performance. To aid in maintaining high performance, the Ultrastar A7K1000 incorporates enhanced Rotational Vibration Safeguard (RVS) technology providing up to 50% improvement over the previous generation against performance degradation, leading the industry.
Finally, the Ultrastar A7K1000 is targeted at 1.2 million hours MTBF and provides the industry’s most comprehensive 5-year warranty.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA II |
Type: | HDD |
Component for: | Server/workstation |
Storage drive buffer size: | 32 MB |
HDD interface transfer rate: | 3 Gbit/s |
HDD average transfer rate: | 85 MB/s |
HDD number of heads: | 10 |
HDD number of cylinders: | 16383 |
Read seek time: | 8.2 ms |
Write seek time: | 9.2 ms |
Full stroke seek time: | 14.7 ms |
Track to track seek time: | 0.8 ms |
Average latency: | 4.17 ms |
SMART technology: | ✓ |
Bytes per sector: | 512 |
Start/stop cycles: | 50000 |
Mean time between failures (MTBF): | 1200000 h |
Windows operating systems supported: | ✓ |
Mac operating systems supported: | ✓ |
Linux operating systems supported: | ✓ |
Power: | |
Power consumption (idle): | 9 W |
Operating voltage: | 5 / 12 V |
Start-up current: | 1.2 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 8 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating vibration: | 0.67 G |
Non-operating vibration: | 1.04 G |
Operating altitude: | -300 - 3048 m |
Non-operating altitude: | -300 - 12000 m |
Operating shock: | 70 G |
Non-operating shock: | 300 G |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 28.1 mm |
Depth: | 147 mm |
Weight: | 700 g |
Packaging data: | |
Quantity: | 1 |
Hitachi 750Gb 5400rpm HDD SATA
HTS547575A9E384
Regular price $170.00 $195.50 incl GST Save $-170.00Highlights
- Up to 750GB of capacity
- Advanced Format, industry standard 4K sector size
- 512 byte emulation (512e)
- Low power consumption
- Halogen-free for eco-friendly design
- Self-encrypting models available
- Enhanced availability (EA) models for applications needing around-the-clock access in lower-transaction environments
Applications / Environments
- Notebook PCs
- External storage
- Gaming PCs
- Small-form-factor video devices
- Blade servers (EA)
- Network routers (EA)
- Video surveillance (EA)
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 750 GB |
HDD speed: | 5400 RPM |
Interface: | Serial ATA |
Storage drive buffer size: | 8 MB |
Full stroke seek time: | 20 ms |
Average latency: | 5.5 ms |
Power: | |
Operating voltage: | 5 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 65 °C |
Weight & dimensions: | |
Width: | 70 mm |
Height: | 9.5 mm |
Depth: | 100 mm |
Weight: | 102 g |
Other features: | |
Data transfer rate: | 3 Gbit/s |
HGST 1TB 3G SATA 7K2 LFF Enterprise HDD
HUA722010CLA330
Regular price $80.00 $92.00 incl GST Save $-80.00Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA II |
Storage drive buffer size: | 32 MB |
Bytes per sector: | 512 |
Power: | |
Power consumption (read): | 8.4 W |
Power consumption (write): | 8.4 W |
Power consumption (idle): | 3.9 W |
Operating voltage: | 5 / 12 V |
Start-up current: | 1.2 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating vibration: | 0.67 G |
Operating shock: | 70 G |
Non-operating shock: | 350 G |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 680 g |
Other features: | |
Data transfer rate: | 3 Gbit/s |
samsung 640 GIG SATA 2.5''
HM641JI
Regular price $75.00 $86.25 incl GST Save $-75.00- Max. 320 GB formatted capacity per disk.
- Serial ATA 3.0Gbps Interface Support.
- SATA Native Command Queuing Feature.
- TuMR/PMR head with FOD technology.
- Load/Unload Head Technology.
- ATA Security Mode Feature Set.
- ATA S.M.A.R.T. Feature Set.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 640 GB |
HDD speed: | 5400 RPM |
Interface: | Serial ATA II |
Type: | HDD |
Storage drive buffer size: | 8 MB |
Average latency: | 12 ms |
Bytes per sector: | 512 |
Power: | |
Power consumption (typical): | 2.5 W |
Power consumption (standby): | 0.25 W |
Power consumption (off): | 0.2 W |
Operating voltage: | 5 V |
Start-up current: | 1000 A |
Operational conditions: | |
Operating temperature (T-T): | 5 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating vibration: | 1.5 G |
Operating altitude: | -300 - 3000 m |
Non-operating altitude: | -400 - 15000 m |
Operating shock: | 400 G |
Non-operating shock: | 900 G |
Weight & dimensions: | |
Width: | 69.8 mm |
Height: | 9.5 mm |
Depth: | 100 mm |
Weight: | 105 g |
Other features: | |
Drive ready time: | 4 s |
Samsung 320GB SATA 3.5 HDD
HD322GJ
Regular price $60.00 $69.00 incl GST Save $-60.00- Formatted capacity is 320GB/Disk formatted capacity
- Serial ATA 3.0Gbps Interface Support
- Improved recording stability over temperature with PMR
- Advanced dynamic FOD control for best data integrity
- Intelligent compensation of external disturbance
- SATA Native Command Queuing Feature
- Device Initiated SATA Power Management
- Rotational vibration sensor(Optional)
- Environment friendly product with RoHS compliance
- Improved performance with dual-ARM based firmware
- ATA S.M.A.R.T. Compliant
- ATA Automatic Acoustic Management Feature
- ATA 48-bit Address Feature
- ATA Device Configuration Overlay Feature
- NoiseGuard™
- SilentSeek™
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 320 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA |
Storage drive buffer size: | 16 MB |
Average seek time: | 8.9 ms |
Average latency: | 4.17 ms |
Bytes per sector: | 512 |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating altitude: | -300 - 3000 m |
Non-operating altitude: | -300 - 12000 m |
Operating shock: | 70 G |
Non-operating shock: | 350 G |
Weight & dimensions: | |
Width: | 101.5 mm |
Height: | 26.1 mm |
Depth: | 147 mm |
Weight: | 430 g |
Other features: | |
Ethernet LAN: | ✗ |
Product colour: | Black |
Internal: | ✓ |
Data transfer rate: | 3 Gbit/s |
USB powered: | ✗ |
FireWire 400: | ✗ |
FireWire 800: | ✗ |
Fibre Channel: | ✗ |
HP M6625 300GB 6G SAS 10K SFF Htplg HDD
AP875AR
Regular price $250.00 $287.50 incl GST Save $-250.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
HDD interface transfer rate: | 6 Gbit/s |
Compatible products: | M6625 2.5-inch SAS Drive Enclosure |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Storage drive adapter included: | ✗ |
HP MSA 1TB 6G SAS 7K2 LFF MDL Htplg HDD
AP861A
Regular price $310.00 $356.50 incl GST Save $-310.00Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 1024 GB |
HDD speed: | 7200 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Power: | |
Operating voltage: | 5 / 12 V |
Weight & dimensions: | |
Weight: | 2.27 kg |
Other features: | |
Product colour: | Metallic |
Internal: | ✓ |
Data transfer rate: | 4.7 Gbit/s |
Drive device, transfer rate: | 600 MB/s |
Number of products included: | 1 pc(s) |
Dimensions (W x D x H) (imperial): | 215.9 x 165.1 x 317.5 mm (8.5 x 6.5 x 12.5") |
Weight (imperial): | 2.27 kg (5 lbs) |
HP 1.2TB 12G SAS 10K SFF SC HtPlg HDD
872479-B21
Regular price $380.00 $437.00 incl GST Save $-380.00Performance and Reliability for Multiple Application Environments
HPE Server Enterprise Hard Drives are ideal for transaction processing, database applications, big data analytics and high-performance computing.
Broad portfolio of optimized solutions provide up to 1.8 TB of storage in a smaller footprint.
Efficient drives for power and space constrained datacenters.
Latest 12G SAS interface for increased performance.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 1200 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
HDD interface transfer rate: | 12 Gbit/s |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Storage drive adapter included: | ✗ |
Quantity: | 1 |
IBM 600GB 6G SAS 10K SFF HDD
90Y8782
Regular price $275.00 $316.25 incl GST Save $-275.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 600 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Hot-swap: | ✓ |
HDD interface transfer rate: | 6 Gbit/s |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Quantity: | 1 |
IBM 300GB 6G SAS 10K SFF Htplg HDD
90Y8877
Regular price $215.00 $247.25 incl GST Save $-215.00Reliability
- SAS compliance enables these HDDs to connect directly to selected System x systems.
- S.M.A.R.T. technology allows software utilities to alert you of certain impending drive failures
- With S.M.A.R.T. replacements can be made before a problem occurs.
Rigorous testing through the ServerProven® program instills confidence that your storage subsystem is compatible and will function reliably.
You can increase your storage and data management effectiveness when you install these new high-performance SATA and SAS HDDs in your IBM System x configurations.
Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Hot-swap: | ✓ |
Certification: | UL, CSA, TUV, CE Mark, C-Tick Mark, IEC, Taiwan (BSMI Certification), Korea EMI |
Power: | |
Operating voltage: | 5 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Operating relative humidity (H-H): | 5 - 90% |
Operating altitude: | 0 - 2133 m |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 26.2 mm |
Depth: | 147 mm |
Weight: | 690 g |
Packaging data: | |
Package weight: | 1.74 kg |
Other features: | |
Drive device speed: | 1000 RPM |
Package dimensions (WxDxH): | 203 x 244 x 146 mm |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
Depth (imperial): | 14.7 cm (5.8") |
Height (imperial): | 2.54 cm (1") |
Width (imperial): | 10.2 cm (4") |
IBM 1TB 6G SAS 7K2 LFF MDL Htplg HDD
90Y8567
Regular price $390.00 $448.50 incl GST Save $-390.00IBM 500 GB, 1 TB, 2 TB, and 3 TB 7,200 rpm 6 Gbps 3.5-inch hot-swap and simple-swap NL SATA and 1 TB, 2 TB, and 3 TB hot-swap NL SAS HDDs can provide the performance required for extensive storage capacity while providing the flexibility of hot-swap or simple-swap versions.
- 7,200 rpm HDDs deliver SAS or SATA device reliability and largest capacity performance in the IBM HDD family.
- 3.5-inch, slim-line form factor optimizes storage capacity.
- Through use of software utilities, Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) can alert you of certain impending drive failures so that replacements can be made.
- Hot-swap and simple-swap versions of the HDD options are available as SAS and SATA.
- One-year warranty included.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Hot-swap: | ✓ |
Compatible products: | System x servers |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 60 °C |
Operating relative humidity (H-H): | 5 - 90% |
Operating altitude: | 0 - 2133 m |
Weight & dimensions: | |
Width: | 101.6 mm |
Height: | 26.2 mm |
Depth: | 147 mm |
Weight: | 690 g |
Packaging data: | |
Bundled software: | UL, CSA, TUV, CE Mark, C-Tick Mark, IEC, Taiwan (BSMI Certification), Korea EMI |
Package weight: | 1.74 kg |
Other features: | |
Drive device speed: | 7200 RPM |
Package dimensions (WxDxH): | 203 x 244 x 146 mm |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
Depth (imperial): | 14.7 cm (5.8") |
Height (imperial): | 2.54 cm (1") |
Width (imperial): | 10.2 cm (4") |
IBM 300GB 6G SAS 10K SFF Htplg HDD
90Y8878
Regular price $185.00 $212.75 incl GST Save $-185.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
Hot-swap: | ✓ |
Power: | |
Operating voltage: | 5 V |
IBM 300GB 15K 6GB SAS 2.5''
81Y9891
Regular price $550.00 $632.50 incl GST Save $-550.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Compatible products: | DS3524 |
Power: | |
Operating voltage: | 5 V |
Other features: | |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
IBM 900GB 6G SAS 10K SFF HDD
81Y9654
Regular price $230.00 $264.50 incl GST Save $-230.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 900 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Hot-swap: | ✓ |
Power: | |
Operating voltage: | 5 V |
Other features: | |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
IBM 600GB 6G SAS 10K SFF HDD
85Y6268
Regular price $275.00 $316.25 incl GST Save $-275.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 600 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
HDD interface transfer rate: | 6 Gbit/s |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Quantity: | 1 |
IBM 1TB 6G SAS 7K2 SFF MDL Htplg HDD
81Y9691
Regular price $390.00 $448.50 incl GST Save $-390.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 1000 GB |
HDD speed: | 7200 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
HDD interface transfer rate: | 6 Gbit/s |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Quantity: | 1 |
HP MSA 300GB 6G SAS 15K SFF Htplg HDD
730705-001
Regular price $550.00 $632.50 incl GST Save $-550.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Type: | HDD |
Component for: | Server/workstation |
HDD interface transfer rate: | 6 Gbit/s |
Power: | |
Operating voltage: | 5 V |
HP 4TB 6G SAS 7K2 LFF MDL Htplg HDD
693689-B21
Regular price $185.00 $212.75 incl GST Save $-185.00Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 4000 GB |
HDD speed: | 7200 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Windows operating systems supported: | ✓ |
Linux operating systems supported: | ✓ |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 60 °C |
Storage temperature (T-T): | -40 - 65 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 90% |
Other features: | |
Data transfer rate: | 6 Gbit/s |
HP 500GB 6G SATA 7K2 LFF HDD
659341-B21
Regular price $150.00 $172.50 incl GST Save $-150.00Designed and Engineered to Provide Reliable and Cost Efficient Data Storage.
Increased Midline drive reliability of approximately two times that of Entry drives based on a <40% workload. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB. Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5in (SFF) and 3.5in (LFF) form factors in a wide variety of capacity points. Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive. 3Gb/sec data transfer rate supporting existing servers. New 6Gb/sec data transfer rate exclusively for HP ProLiant Gen8 servers, with new hot plug carrier design.
Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.
Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.
SATA Applications
With the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 500 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA |
Full stroke seek time: | 17.55 ms |
Track to track seek time: | 0.5 ms |
Average seek time: | 8.5 ms |
Bytes per sector: | 512 |
Native Command Queuing (NCQ): | ✓ |
Power: | |
Operating voltage: | 5 / 12 V |
Operational conditions: | |
Operating temperature (T-T): | 10 - 35 °C |
Weight & dimensions: | |
Width: | 26.4 mm |
Height: | 184.2 mm |
Depth: | 110.7 mm |
Weight: | 1.36 kg |
Other features: | |
Wi-Fi: | ✗ |
Ethernet LAN: | ✗ |
Product colour: | Black |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
FireWire 400: | ✗ |
FireWire 800: | ✗ |
Compatible memory cards: | Not supported |
Card reader integrated: | ✗ |
Number of products included: | 1 pc(s) |
HP 3TB 6G SATA 7K2 LFF SC MDL Htplg HDD
628061-B21
Regular price $280.00 $322.00 incl GST Save $-280.00Designed and Engineered to Provide Reliable and Cost Efficient Data Storage.
Increased Midline drive reliability of approximately two times that of Entry drives based on a <40% workload. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB. Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5in (SFF) and 3.5in (LFF) form factors in a wide variety of capacity points. Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive. 3Gb/sec data transfer rate supporting existing servers. New 6Gb/sec data transfer rate exclusively for HP ProLiant Gen8 servers, with new hot plug carrier design.
Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.
Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.
SATA Applications.
With the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 3072 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA |
SMART technology: | ✓ |
Power: | |
Operating voltage: | 5 / 12 V |
Weight & dimensions: | |
Width: | 105.6 mm |
Height: | 26.9 mm |
Depth: | 169.9 mm |
Weight: | 1.36 kg |
Other features: | |
Wi-Fi: | ✗ |
Ethernet LAN: | ✗ |
Product colour: | Black |
Internal: | ✓ |
Data transfer rate: | 6 Gbit/s |
FireWire 400: | ✗ |
FireWire 800: | ✗ |
Compatible memory cards: | Not supported |
Card reader integrated: | ✗ |
Connector(s): | SATA 7-Pin |
Number of products included: | 1 pc(s) |
HP 300GB 6G SAS 15K SFF Htplg HDD
627117-B21
Regular price $225.00 $258.75 incl GST Save $-225.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 15000 RPM |
Interface: | SAS |
Component for: | Server/workstation |
Power: | |
Operating voltage: | 5 V |
Weight & dimensions: | |
Weight: | 725 g |
Other features: | |
Data transfer rate: | 4.7 Gbit/s |
Drive device, transfer rate: | 600 MB/s |
HP M6612 0B26319 MB2000FBUCL 2TB 6G SAS 7K2 LFF MDL Htplg HDD AW590A
602119-001
Regular price $285.00 $327.75 incl GST Save $-285.00- 7200 rpm drives offer very good performance and the highest available capacities.
Specs | |
Features: | |
HDD size: | 3.5" |
HDD capacity: | 2000 GB |
HDD speed: | 7200 RPM |
Interface: | Serial ATA |
Power: | |
Operating voltage: | 5 / 12 V |
Other features: | |
Internal: | ✓ |
HP 300Gb 10K 6G 2.5'' SAS DP HDD
597609-001
Regular price $175.00 $201.25 incl GST Save $-175.00Specs | |
Features: | |
HDD size: | 2.5" |
HDD capacity: | 300 GB |
HDD speed: | 10000 RPM |
Interface: | SAS |
Type: | HDD |
HDD interface transfer rate: | 6 Gbit/s |
Power: | |
Operating voltage: | 5 V |
Packaging data: | |
Storage drive adapter included: | ✗ |