- 3Com
- Add-on Card
- Allied Telesis
- Brocade
- Cisco
- D-Link
- Dell
- Disk Arrays
- Edgecore 24 x
- EMC
- Generic
- Hewlett Packard
- Hewlett Packard Enterprise
- HP
- IBM
- KVM Switches
- Linksys
- NetApp
- Netgear
- Network
- Network Equipment Chassis
- Network Switch Components
- Network Switch Modules
- Network Switches
- Other
- Planet
- Power Supply Units
- PSU
- Refurb Server
- Refurb Storage
- SFP
- SMC
- Switch
- 3Com
- Add-on Card
- Allied Telesis
- Brocade
- Cisco
- D-Link
- Dell
- Disk Arrays
- Edgecore 24 x
- EMC
- Generic
- Hewlett Packard
- Hewlett Packard Enterprise
- HP
- IBM
- KVM Switches
- Linksys
- NetApp
- Netgear
- Network
- Network Equipment Chassis
- Network Switch Components
- Network Switch Modules
- Network Switches
- Other
- Planet
- Power Supply Units
- PSU
- Refurb Server
- Refurb Storage
- SFP
- SMC
- Switch
95 products
HP 2520-24-PoE Switch (J9138A)
J9138A
Regular price $180.00 $207.00 incl GST Save $-180.00Quality of Service (QoS)
• Selectable queue configuration: increases performance and/or traffic reliability by selecting the number of queues that best meet the requirements of your network applications; switch will map 8 priorities to either 2 or 4 queues
Management
• Choice of management interfaces: Web graphical user interface (GUI): easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): robust command-line interface provides advanced configuration and diagnostics. Simple Network Management Protocol (SNMPv2c/SNMPv3): allows switch to be managed with a variety of third-party network management applications.
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all ports
Performance
• Switch on a chip: provides highly integrated, high-performance switch design with a non-blocking architecture
Resiliency and high availability
• Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections. IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.
Layer 2 switching
• VLAN support and tagging: supports the IEEE 802.1Q (4,094 VLAN IDs) and up to 256 port-based VLANs simultaneously
Security
• Manager and operator privilege levels: enables read-only (operator) and read-write (manager) access on management interfaces
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
System event log: | ✓ |
MIB support: | MIB II, Bridge MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Gigabit Ethernet (copper) ports quantity: | 2 |
Combo SFP ports quantity: | 2 |
SFP/SFP+ slots quantity: | 2 |
Console port: | RS-232 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x |
10G support: | ✗ |
Copper ethernet cabling technology: | 1000BASE-T,1000BASE-TX,100BASE-TX,10BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 12.8 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 9.5 Mpps |
Number of queues: | 4 |
Maximum data transfer rate: | 1 Gbit/s |
Packet buffer memory: | 0.384 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
IGMP snooping: | ✓ |
Security algorithms: | 802.1x RADIUS,SSH,SSL/TLS |
MAC address filtering: | ✓ |
Static port security: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | IGMPv3, LLDP, SNMPv1/v2c/v3 |
Supported network protocols: | IPv6, UDP, TFTP, ICMP, TCP, ARP, Telnet, BOOTP, SNTPv4 |
Design: | |
Safety: | cUL, CE, UL, CAN/CSA, EN, AS/NZS, IEC |
Electromagnetic compatibility: | FCC, VCCI, EN, CISPR 22, AS/NZS, IEC/EN |
Performance: | |
Built-in processor: | ✓ |
Processor model: | PowerPC MPC8313 |
Processor frequency: | 266 MHz |
Memory type: | DDR2-SDRAM |
Internal memory: | 128 MB |
Flash memory: | 32 MB |
Noise level: | 27.9 dB |
Power: | |
Input current: | 1.6 - 3.3 A |
Power consumption (typical): | 257 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 95% |
Operating altitude: | 0 - 3000 m |
Heat dissipation: | 208 BTU/h |
Weight & dimensions: | |
Weight: | 3.22 kg |
Other features: | |
Latency: | 1.9µs/1.5µs |
Dimensions (WxDxH): | 246.1 x 443 x 44.5 mm |
Connectivity technology: | Wired |
Networking features: | Gigabit Ethernet |
Wi-Fi: | ✗ |
Input frequency: | 50/60 Hz |
Input voltage: | 100 - 240 V |
Acoustic pressure emissions: | 36 dB |
Weight (imperial): | 3.22 kg (7.1 lbs) |
Dimensions (W x D x H) (imperial): | 443 x 246.1 x 44.5 mm (17.4 x 9.69 x 1.75") |
HP 5120-48G-PoE EI 48/4SFP 1GbE PPoE+ Switch
JE071A
Regular price $375.00 $431.25 incl GST Save $-375.00Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network
Management
• Friendly port names: allow assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 176 Gbps nonblocking switching fabric provides wire-speed switching with up to 130 million pps throughput
Resiliency and high availability
• Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
HP ProCurve 1810-48G 48+4 SFP 1GbE Switch
J9660A
Regular price $275.00 $316.25 incl GST Save $-275.00HP 1810 switch series devices are basic smart managed fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution. The series has three models: 8-, 24-, and 48-port 10/100/1000 switches. The 24-port model includes two dual-purpose combo SFP ports, and the 48-port model has four additional true Gigabit Ethernet SFP ports (52 total active ports) for fiber connectivity. All models support flexible deployment options, including mounting on walls or ceilings, under tables, or desktop operation, and come with an anti-theft protection Kensington Lock slot (lock not included). The 8-port model can optionally be powered by an upstream Power over Ethernet (PoE) switch. HP 1810 switches support QoS traffic prioritization and security features such as denial-of-service prevention. Customizable features include VLANs and link aggregation trunking. HP 1810 switches come with lifetime warranty.
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification witheight priority levels mapped to four queues. Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
Simple Web management: intuitive Web GUI allows for easy management of device by even nontechnical users. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. SNMPv1, v2c: devices can be discovered and monitored from an SNMP management station. Dual flash images: provide independent primary and secondary operating system files for backup while upgrading. Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring.
Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. Non-shared SFP ports (1810-48G switch): four true SFP ports for optional fiber connectivity such asGigabit-SX, -LX, or 100-FX; also support SFP 1G RJ-45 copper connections. Dual-personality ports (1810-24G switch): two Gigabit Ethernet copper ports or SFP slots for optional fiber connectivity such as Gigabit-SX and -LX, or 100-FX. IEEE 802.3af PoE-powered device option (1810-8G switch): can obtain power from a standard PoE device on Port 1, making the switch ideal for deployments where a power outlet is not available; such flexibility helps you to extend the network to wherever an Ethernet cable can reach. Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds.
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port. Link aggregation (trunking): brings together groups of ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks; the 1810-8G switch has four trunks of four links each, the 1810-24G switch has eight trunks of four links each, and the 1810-48G switch has 16 trunks of eight links each. Fiber uplink: available on 24- and 48-port models; provides greater distance connectivity using Gigabit Ethernet fiber uplinks.
VLAN support and tagging: support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security between workgroups. Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers.
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. Automatic denial-of-service protection: monitors six types of malicious attacks and protects the network by blocking the attacks. Management password: provides security so that only authorized access to the Web browser interface is allowed.
Specs | |
Management features: | |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3 |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 104 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 77.4 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Jumbo frames support: | ✓ |
Packet buffer memory: | 1.5 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Design: | |
Rack mounting: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 |
Performance: | |
Memory type: | SDRAM |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 60 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Heat dissipation: | 204 BTU/h |
Weight & dimensions: | |
Width: | 442 mm |
Depth: | 249 mm |
Height: | 46 mm |
Weight: | 2.86 kg |
Packaging data: | |
User guide: | ✓ |
Other features: | |
Latency: | 8.4, 3.2 |
Dimensions (WxDxH): | 247.7 x 442 x 44.5 mm |
Power supply type: | AC |
Power LED: | ✓ |
Input frequency: | 50 - 60 Hz |
Input voltage: | 100-127/200-240 VAC |
Ethernet LAN: | ✓ |
Ethernet interface type: | Gigabit Ethernet |
3Com Baseline Switch 2924-SFP Plus 3CBLSG24 - switch - 24 ports - managed
10015606
Regular price $95.00 $109.25 incl GST Save $-95.00JG937A HP FlexNetwork 5130 EI 48 port 1GbE + 4prt 10GbE SFP+ PPoE+ L3 Managed Switch
JG937A
Regular price $1,350.00 $1,552.50 incl GST Save $-1,350.00HPE FlexNetwork 5130 EI Switch Series
The HPE FlexNetwork 5130 EI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) interfaces. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
Brocade FWS648G-POE network switch Managed L3 Black Power over Ethernet (PoE)
FWS648G-POE
Regular price $195.00 $224.25 incl GST Save $-195.00Cisco WS-X4306-GB network switch module Fast Ethernet,Gigabit Ethernet
WS-X4306-GB
Regular price $35.00 $40.25 incl GST Save $-35.00Specs | |
Management features: | |
Switch type: | Unmanaged |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 6 |
Network: | |
Networking standards: | IEEE 802.3 |
Full duplex: | ✓ |
Data transmission: | |
Maximum data transfer rate: | 1 Gbit/s |
Protocols: | |
Data link protocols: | Gigabit Ethernet |
Performance: | |
Minimum system requirements: | Cisco IOS 12.1(8a)EW |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Weight & dimensions: | |
Weight: | 2.2 kg |
Other features: | |
Dimensions (WxDxH): | 366 x 267 x 44 mm |
Networking features: | Ethernet/Fast-Ethernet |
Catalyst 3750E 24prt 1GbE + 2prt 10GbE X2 Switch
WS-C3750E-24TD-E
Regular price $190.00 $218.50 incl GST Save $-190.00Specs | |
Management features: | |
Switch type: | Managed |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
IP routing: | ✓ |
Data transmission: | |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
DHCP features: | DHCP server,DHCP client |
Protocols: | |
Management protocols: | RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3 |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Supported network protocols: | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, OSPFv3 |
Design: | |
Stackable: | ✓ |
LED indicators: | ✓ |
Certification: | CE, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1 |
Performance: | |
Memory type: | RAM |
Internal memory: | 256 MB |
Flash memory: | 64 MB |
Power: | |
Redundant power supply (RPS) support: | ✓ |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 0 - 95% |
Weight & dimensions: | |
Weight: | 8.1 kg |
Other features: | |
Data transfer rate: | 10 Mbit/s |
Dimensions (WxDxH): | 445 x 460 x 45 mm |
Connectivity technology: | Wired |
Power requirements: | AC 120/230 V ( 50/60 Hz ) |
Bundled software: | Cisco IOS IP Services |
Authentication method: | Kerberos, SSH, RADIUS, TACACS+ |
I/O ports: | 1x cnsl - RJ-45\n1x Ethernet 10Base-T/100Base-TX - RJ-45 |
Technical features: | ARP, VLAN, IGMP, DTP, PAgP, ACL |
WS-C3750E-48TD-E Cisco Catalyst 3750-E Series Switch
WS-C3750E-48TD-E
Regular price $1,100.00 $1,265.00 incl GST Save $-1,100.00SKU: WS-C3750E-48TD-E
The Cisco Catalyst 3750-E Series Switches with StackWise Plus is an enterprise-class line of stackable wiring closet switches that facilitates the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with 10 Gigabit Ethernet uplinks, the Cisco Catalyst 3750-E enhances worker productivity by enabling applications such as IP telephony, wireless, and video.
Specs | |
Management features: | |
Switch type: | Managed |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
IP routing: | ✓ |
Data transmission: | |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
DHCP features: | DHCP server,DHCP client |
Protocols: | |
Management protocols: | RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3 |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Supported network protocols: | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, OSPFv3 |
Design: | |
Stackable: | ✓ |
LED indicators: | ✓ |
Certification: | CE, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1 |
Performance: | |
Memory type: | RAM |
Internal memory: | 256 MB |
Flash memory: | 64 MB |
Power: | |
Redundant power supply (RPS) support: | ✓ |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 0 - 95% |
Weight & dimensions: | |
Weight: | 8.1 kg |
Other features: | |
Data transfer rate: | 10 Mbit/s |
Dimensions (WxDxH): | 445 x 460 x 45 mm |
Connectivity technology: | Wired |
Power requirements: | AC 120/230 V ( 50/60 Hz ) |
Bundled software: | Cisco IOS IP Services |
Authentication method: | Kerberos, SSH, RADIUS, TACACS+ |
I/O ports: | 1x cnsl - RJ-45\n1x Ethernet 10Base-T/100Base-TX - RJ-45 |
Technical features: | ARP, VLAN, IGMP, DTP, PAgP, ACL |
WS-C3560E-24TD-SD Cisco Catalyst 3560-E Series Switch
WS-C3560E-24TD-S
Regular price $225.00 $258.75 incl GST Save $-225.00Cisco Catalyst 3560-E Series Primary Features
• Cisco TwinGig converter module for migrating uplinks from Gigabit Ethernet to 10 Gigabit Ethernet.
• PoE configurations with 15.4W of PoE on all 48 ports.
• Industry first portfolio to scale beyond 15.4W per port delivering maximum solution simplicity for 802.11n access point deployments.
• Access switch models have modular fan and power supply with externally available backup.
• Dual redundant modular power supplies and fans for Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD aggregation switches for nonstop operation.
• Multicast routing, IPv6 routing, and access control list (ACL) in hardware.
• Out-of-band Ethernet management port along with RS-232 console port.
• 24 10/100/1000 ports + 2 X2-based 10 Gigabit Ethernet ports.
• 68-Gbps, wire rate backplane.
• Field-replaceable 265WAC power supply and fan tray.
• 1 rack unit (RU) fixed configuration multilayer switch.
• IPv6.
• IP Base software feature set (IPB).
Specs | |
Management features: | |
Switch type: | Managed |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Gigabit Ethernet (copper) ports quantity: | 10 |
Data transmission: | |
Maximum data transfer rate: | 68 Gbit/s |
Jumbo frames support: | ✓ |
Design: | |
Stackable: | ✗ |
Performance: | |
Memory type: | DRAM |
Internal memory: | 256 MB |
Flash memory: | 64 MB |
Noise level: | 45 dB |
Mean time between failures (MTBF): | 181.086 h |
Power: | |
Power consumption (typical): | 256 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -25 - 70 °C |
Operating relative humidity (H-H): | 0 - 95% |
Weight & dimensions: | |
Weight: | 8.1 kg |
Other features: | |
Dimensions (WxDxH): | 44 x 44 x 46 mm |
Power supply type: | AC |
Non-operating relative humidity (non-condensing): | 10 - 85% |
Connectivity LEDs: | ✓ |
Cisco Catalyst WS-C3560X-24T-L 3560-X 24prt 1GbE + Modular Slot Switch
WS-C3560X-24T-L
Regular price $200.00 $230.00 incl GST Save $-200.00Cisco Catalyst 3750-X and 3560-X Series primary features:
- 24 and 48 10/100/1000 PoE+, non-PoE models, and 12 and 24 GE SFP port models
- 24 and 48 10/100/1000 UPOE-capable models with Energy Efficient Ethernet (EEE) support
- Four optional uplink network modules with GE or 10GE ports
- Industry first PoE+ with 30W power on all ports in 1 rack unit (RU) form factor
- Dual redundant, modular power supplies and fans
- Media Access Control Security (MACsec) hardware-based encryption
- Flexible NetFlow and switch-to-switch hardware encryption with the Service Module uplink
- Open Shortest Path First (OSPF) for routed access in IP Base image
- IPv4 and IPv6 routing, Multicast routing, advanced quality of service (QoS), and security features in hardware
- Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement and 90 day access to Cisco Technical Assistance Center (TAC) support
- Enhanced Cisco EnergyWise for operational cost optimization by measuring actual power consumption of the PoE devices, reporting, and reducing energy consumption across the network
- USB Type-A and Type-B ports for storage and console respectively and an out-of-band Ethernet management port
In addition to the above features, the Cisco Catalyst 3750-X switches also offer:
- Cisco StackPower™ technology: An innovative feature and industry first for sharing power among stack members
- Cisco StackWise Plus technology for ease of use and resiliency with 64 Gbps of throughput
- Investment protection with backward compatibility with all other models of Cisco Catalyst 3750 Series Switches
Switch Configurations
All switch models can be configured with four optional network modules. The UPOE, PoE+, and non-PoE switch models are available with either the LAN Base or IP Base feature set. IP Services feature set is available as an upgrade option at the time of ordering or through a license at a later time. The GE SFP switch models are available with either IP Base or IP Services feature set.
Cisco Catalyst 3750-X and 3560-X Series Software
In addition to IP Base and IP Services feature sets, the Cisco Catalyst 3750-X and 3560-X Series come with a new LAN Base feature set. The three feature sets available with all Cisco Catalyst 3750-X and 3560-X Series Switches are:
- LAN Base: enterprise access Layer 2 switching features
- IP Base: baseline enterprise access Layer 3 switching features
- IP Services: advanced Layer 3 switching (IPv4 and IPv6) features
The LAN Base feature set includes comprehensive Layer 2 features, with up-to 255 VLANs. The IP Base feature set provides baseline enterprise services in addition to all LAN Base features, with 1K VLANs. IP Base also includes the support for routed access, StackPower (available only on the Catalyst 3750-X), MACsec, and the new Cisco Service Module. The IP Services feature set provides full enterprise services that includes advanced Layer 3 features such as Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), Protocol Independent Multicast (PIM), and IPv6 routing such as OSPFv3 and EIGRPv6. All software feature sets support advanced security, QoS, and management features.
The Cisco Catalyst 3750-X Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3750‑X Series LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP Services features set is not supported.
Customers can transparently upgrade the software feature set in the Cisco Catalyst 3750-X and 3560-X Series Switches through Cisco IOS® Software activation. Software activation authorizes and enables the Cisco IOS Software feature sets. A special file contained in the switch, called a license file, is examined by Cisco IOS Software when the switch is powered on. Based on the license’s type, Cisco IOS Software activates the appropriate feature set. License types can be changed, or upgraded, to activate a different feature set.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
ARP inspection: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x |
Cable types supported: | Cat5e |
Full duplex: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
VLAN support: | ✓ |
Virtual LAN features: | Private VLAN |
Number of VLANs: | 1005 |
Data transmission: | |
Throughput: | 65.5 Mpps |
Jumbo frames support: | ✓ |
Jumbo frames: | 9216 |
Security: | |
DHCP features: | DHCP server,DHCP client |
Access Control List (ACL): | ✓ |
IGMP snooping: | ✓ |
Static port security: | ✓ |
SSH/SSL support: | ✓ |
BPDU filtering/protection: | ✓ |
IP-MAC-Port binding: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✗ |
Product colour: | Blue |
Form factor: | 1U |
LED indicators: | ✓ |
Safety: | UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS, CB, AS/NZS 60950-1CE, NOM, GOST |
Electromagnetic compatibility: | FCC, EN 55022B, VCCI, AS/NZS 3548, KCC, CE, GOST |
Performance: | |
Internal memory: | 256 MB |
Flash memory: | 64 MB |
Noise level: | 43 dB |
Mean time between failures (MTBF): | 208218 h |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | -5 - 40 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 95% |
Operating altitude: | 0 - 3000 m |
Non-operating altitude: | 0 - 4000 m |
Weight & dimensions: | |
Width: | 445 mm |
Depth: | 460 mm |
Height: | 44.5 mm |
Weight: | 7 kg |
WS-C4503-E Cisco 4500 Switch
WS-C4503
Regular price $950.00 $1,092.50 incl GST Save $-950.00Integrated resiliency enhancements offered in the Cisco Catalyst 4500 Series include integrated inline power for IP telephony, software-based fault tolerance, and 1 + 1 power supply redundancy. Integrated resiliency in both hardware and software minimizes network downtime, ensuring workforce productivity, profitability, and customer success. As a key component of Cisco AVVID (Architecture for Voice, Video and Integrated Data), the Cisco Catalyst 4500 extends control to the network edge with intelligent network services, including sophisticated quality of service (QoS), predictable performance, advanced security, comprehensive management, and integrated resiliency. Offering compatibility with Cisco Catalyst 4000 Family line cards and supervisor engines, the Cisco Catalyst 4500 Series enables an extended window of deployment for the Cisco Catalyst 4000 Family in converged networks. This reduces the cost of ownership by minimizing recurring operational expenses, thus improving return on investment (ROI).
Specs | |
Weight & dimensions: | |
Dimensions (WxDxH): | 440 x 317 x 311 mm |
Weight: | 26.3 kg |
Technical features: | 7U |
Cisco Catalyst 6504-E Switch
WS-C6504-E
Regular price $1,500.00 $1,725.00 incl GST Save $-1,500.00Specs | |
Rack capacity: | 5U |
Required software: | Cisco IOS 12.2(18)SXF, 12.2(18)SXE, 12.2(33)SXH, 15.0(1)SY |
Number of slots: | 4 |
Mean time between failures (MTBF): | 677643 h |
Power: | |
AC input voltage: | 100-240 V |
Operational conditions: | |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -20 - 65 °C |
Operating relative humidity (H-H): | 5 - 90% |
Storage relative humidity (H-H): | 5 - 95% |
Operating altitude: | 0 - 2000 m |
Certificates: | |
Safety: | UL 60950 Second Edition, CAN/CSA-C22.2 No. 60950 Second Edition, EN 60950 Second Edition, IEC 60950 Second Edition, AS/NZS 60950 |
Weight & dimensions: | |
Width: | 445 mm |
Depth: | 552 mm |
Height: | 222 mm |
Weight: | 18.1 kg |
Cisco Catalyst 3750E 24prt 1GbE + 2prt 10GbE X2 Switch
WS-C3750E-24TD-S
Regular price $400.00 $460.00 incl GST Save $-400.00Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Gigabit Ethernet (copper) ports quantity: | 2 |
Console port: | RS-232 |
Network: | |
IP routing: | ✓ |
Rate limiting: | ✓ |
Data transmission: | |
MAC address table: | 12000 entries |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
Access Control List (ACL): | ✓ |
Static port security: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Design: | |
Stackable: | ✓ |
Power: | |
Power consumption (typical): | 50 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Weight & dimensions: | |
Weight: | 8.1 kg |
Other features: | |
Dimensions (WxDxH): | 445 x 460 x 44.5 mm |
Bandwidth: | 64 Gbit/s |
Packet transfer speed: | 6.5 mpps |
Cisco Catalyst 3560 48prt 10/100 + 4 1GbE SFP PPoE Switch
WS-C3560-48PS-S
Regular price $150.00 $172.50 incl GST Save $-150.00Customers can deploy networkwide intelligent services-such as advanced quality of service (QoS), rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing-while maintaining the simplicity of traditional LAN switching. Available for the Cisco Catalyst 3560 Series at no charge, the Cisco Network Assistant is a centralized management application that simplifies the administration tasks for Cisco switches, routers, and wireless access points. Cisco Network Assistant provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services.
Features:
- 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
- 1RU fixed-configuration, multilayer switch
- Enterprise-class intelligent services delivered to the network edge
- IEEE 802.3af and Cisco prestandard Power over Ethernet
- Standard Multilayer Software Image (SMI) installed
- Basic RIP and static routing, upgradable to full dynamic IP routing
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
10G support: | ✗ |
Copper ethernet cabling technology: | 100Base-TX,10Base-T |
Full duplex: | ✓ |
IP routing: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Rate limiting: | ✓ |
Spanning tree protocol: | ✓ |
Data transmission: | |
MAC address table: | 12000 entries |
Switching capacity: | 32 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Store-and-forward: | ✓ |
Maximum data transfer rate: | 0.1 Gbit/s |
Jumbo frames support: | ✓ |
Security: | |
DHCP features: | DHCP server |
Access Control List (ACL): | ✓ |
IGMP snooping: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | IGMP, RMON, SNMP, Telnet |
Design: | |
Stackable: | ✗ |
Product colour: | Turquoise |
Safety: | UL 60950, CAN/CSA C22.2, TUV/GS to EN 60950:2000, CB to IEC 60950, NOM-019-SCFI, CE |
Certification: | FCC 15 A, EN 55022: 1998 (CISPR22), EN 55024: 1998 (CISPR24), VCCI A, AS/NZS 3548 A, CE, CNS 13438 A, MIC |
Performance: | |
Internal memory: | 128 MB |
Flash memory: | 32 MB |
Mean time between failures (MTBF): | 173400 h |
Power: | |
Power consumption (typical): | 65 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -25 - 70 °C |
Operating relative humidity (H-H): | 10 - 85% |
Operating altitude: | 0 - 3049 m |
Weight & dimensions: | |
Weight: | 6.1 kg |
Other features: | |
Management platform: | Cisco IOS CLI, Cisco Network Assistant, SAA |
Dimensions (WxDxH): | 445 x 378 x 44 mm |
Connectivity technology: | Wired |
Packet transfer speed: | 13.1 mpps |
Power requirements: | 100-240 VAC, 3.0-1.5A, 50-60Hz |
Acoustic pressure emissions: | 48 dB |
Connectivity LEDs: | ✓ |
Single Port Web/Internet Remote Power Switch
WIFI-RPS9255
Regular price $135.00 $155.25 incl GST Save $-135.00WS-C2960S-48TS-L Cisco 2960-S Series Switch
WS-C2960S-48TS-L
Regular price $270.00 $310.50 incl GST Save $-270.00- 10 and 1 Gigabit Ethernet uplink flexibility with Small Form-Factor Pluggable Plus (SFP+), providing business continuity and fast transition to 10 Gigabit Ethernet
- 24 or 48 ports of Gigabit Ethernet desktop connectivity
- Cisco FlexStack stacking module with 40 Gbps of throughput, allowing ease of operation with single configuration and simplified switch upgrade
- PoE+ with up to 30W per port that allows you to support the latest PoE+ capable devices
- Power supply options, with 740W or 370W fixed power supplies for PoE+ switches are available
- USB storage for file backup, distribution, and simplified operations
- A wide range of software features to provide ease of operation, highly secure business operations, sustainability, and a borderless network experience
- Limited lifetime hardware warranty, including next-business-day replacement with 90-day service and support
Specs | |
Management features: | |
Switch type: | Managed |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
SFP module slots quantity: | 2 |
Network: | |
Networking standards: | IEEE 802.3 |
10G support: | ✗ |
Full duplex: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Jumbo frames support: | ✓ |
Security: | |
DHCP features: | DHCP server,DHCP client |
IGMP snooping: | ✓ |
MAC address filtering: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
LED indicators: | ✓ |
Performance: | |
Internal memory: | 128 MB |
Flash memory: | 64 MB |
Noise level: | 44 dB |
Mean time between failures (MTBF): | 328056 h |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | -5 - 40 °C |
Storage temperature (T-T): | -25 - 70 °C |
Operating relative humidity (H-H): | 10 - 95% |
Weight & dimensions: | |
Width: | 445 mm |
Depth: | 299 mm |
Height: | 45 mm |
Weight: | 4.8 kg |
Other features: | |
Connectivity technology: | Wired |
Non-operating relative humidity (non-condensing): | 10 - 95% |
Linksys WebView 24prt 100MbE + 2/2prt 1GbE SFP PPoE Switch
SRW224P
Regular price $80.00 $92.00 incl GST Save $-80.00SMC TigerSwitch II 24/4SFP 1GbE Switch
SMC8824M
Regular price $75.00 $86.25 incl GST Save $-75.00Specs | |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1v,IEEE 802.1w,IEEE 802.3,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3u |
Copper ethernet cabling technology: | 1000Base-T,100Base-TX,10Base-T |
Full duplex: | ✓ |
Flow control support: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 128 Gbit/s |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
Security algorithms: | SSH |
Protocols: | |
Management protocols: | SNMP (v1,v2c,v3), HTTP, HTTPS, TFTP, IGMP |
Supported network protocols: | SMTP, STP, RSTP, MSTP, LACP |
Design: | |
Safety: | CSA/CUS (CSA 22.2. NO 60950-1 & UL60950-1), TÜV/GS (EN60950-1), CB (IEC60950-1) |
Power: | |
Power consumption (typical): | 66 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 50 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 95% |
Weight & dimensions: | |
Weight: | 5.7 kg |
Other features: | |
Management platform: | Telnet, Console port |
Data transfer rate: | 1000 Mbit/s |
Dimensions (WxDxH): | 440 x 415 x 44 mm |
Connectivity technology: | Wired |
Packet transfer speed: | 95 Mpps |
Power requirements: | 100 - 240V, 50/60 Hz, 2A |
Power supply type: | Internal / External (optional) |
Expansion slots: | 2x 10G uplink\n |
I/O ports: | 24x Gigabit Ethernet\n4x Combo SFP\n2x Stacking\n1x RS-232 Console |
Electromagnetic emissions: | FCC Class A, EN55022 (CISPR 22) Class A, EN 61000-3-2/3, VCCI Class A, C-Tick - AS/NZS 3548 (1995) Class A |
TigerSwitch 1000 10Gb Expansion Module
SMCXFPMOD
Regular price $1,320.00 $1,518.00 incl GST Save $-1,320.00Specs | |
Features: | |
Internal: | ✓ |
Network: | |
Data transfer rate: | 10 Gbit/s |
Connectivity technology: | Wired |
Technical features: | Supports: SR, LR, ER transceivers |
SMC 24-Port 10/100/1000 Gigabit Unmanaged Switch
SMC8524T
Regular price $50.00 $57.50 incl GST Save $-50.00Cisco SG300-52 52/2 SFP 1GbE (SRW2048-K9) 52-Port Gigabit Managed Switch
SG300-52
Regular price $450.00 $517.50 incl GST Save $-450.00Easy-to-Use Managed Switches that Provide the Ideal Combination of Features and Affordability
To stay ahead in a competitive marketplace, small businesses need to make every dollar count. That means getting the most value from your technology investments, but it also means making sure that employees have fast, reliable access to the business tools and information they need. Every minute an employee waits for an unresponsive application – and every minute your network is down – has an impact on your bottom line. The importance of maintaining a strong and dependable business network only grows as your business adds more employees, applications, and network complexity.
When your business needs advanced security and features but value is still a top consideration, you’re ready for the new generation of Cisco® Small Business managed switches: the Cisco 300 Series.
Business Applications
- Whether you need a basic high-performance network to connect employee computers or a solution to deliver data, voice, and video services, the Cisco 300 Series offers a solution to meet your needs. Possible deployment scenarios include:
- Secure desktop connectivity: Cisco 300 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. High performance and reliable connectivity helps speed file transfers and data processing, improves network uptime, and keeps your employees connected and productive.
- Secure Wireless connectivity: With its advanced Security features, Power over Ethernet, Auto Smartports, QoS, VLAN and Access Control features, the Cisco 300 Series Switches are the perfect foundation to add Business Grade wireless to an SMB network.
- Unified communications: As a managed network solution, the Cisco 300 Series provides the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco 300 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other products, providing a complete small business solution.
- Highly secure guest connectivity. Cisco 300 Series Switches let you extend highly secure network connectivity to guests in a variety of settings, such as a hotel, an office waiting room, or any other area open to nonemployee users. Using powerful but easy-to-configure security and traffic segmentation capabilities, you can isolate your vital business traffic from guest services and keep guests’ network sessions private from each other.
Features and Benefits
- Cisco 300 Series Switches provide security, performance, traffic management, and other capabilities – optimized and customized, and at the right price for small businesses. The Cisco 300 Series provides:
- High performance and reliability: Cisco 300 Series Switches have been rigorously tested to deliver the high availability and performance you expect from a Cisco switch. The solutions speed up file transfer times and improve slow, sluggish networks, while keeping your vital business applications available and preventing costly downtime.
- Fast, easy setup and configuration: Cisco 300 Series Switches are designed to be easy to use and manage by small businesses and the partners who serve them.
- Strong security: The Cisco 300 Series Switches provide a high level of security and give you fine- grained control to safeguard your network from unauthorized users. Advanced security features include:
- Embedded security to protect management data traveling to and from the switch and encrypt network communications.
- Extensive access control lists (ACLs) to restrict sensitive portions of the network from unauthorized users and guard against network attacks.
- Guest virtual LANs (VLANs) to let you provide Internet connectivity to nonemployee users while isolating critical business services from guest traffic.
- Support for advanced network security applications such as IEEE 802.1X port security to tightly limit access to specific segments of your network. Web based authentication provides a consistent interface to authenticate all types of host devices and operating systems, without the complexity of deploying IEEE 802.1X clients on each endpoint.
- Time based ACLs and Port Operation restrict access to the network during predesignated times, such as business hours.
- Security mechanisms such as, Bridge Protocol Data Unit (BPDU) Guard and broadcast/multicast/unknown unicast storm control, protect the network from invalid configurations or malicious intent.
- Secure Core Technology (SCT) helps ensure that the switch will receive and process management and protocol traffic no matter how much traffic is received.
- Advanced defense mechanisms, including Dynamic ARP Inspection (DAI), IP Source Guard, and Dynamic Host Configuration Protocol (DHCP) snooping, detect and block deliberate network attacks. Combinations of these protocols are also referred to as IPMB (IP-MAC-port binding).
- IPv6 First Hop Security extends the advanced threat protection to IPv6. This comprehensive security suite includes ND inspection, RA guard, DHCPv6 guard and neighbor binding integrity check, providing unparalleled protection against a vast range of address spoofing and man in the middle attack on IPv6 networks.
- DOS (denial-of-service) attack prevention maximizes network uptime in the presence of an attack.
- Protection of management sessions using Radius, TACACS+ and local database authentication as well as secure management sessions over SSL, SSH, and SNMPv3.
- Power over Ethernet: Cisco 300 Series Switches are available with up to 48 PoE ports of Fast Ethernet or Gigabit Ethernet connectivity. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly, and at a lower cost. Some models support both IEEE 802.3af PoE and IEEE 802.3at PoE+ while others support IEEE 802.3af PoE only.
- IP telephony support: Cisco 300 Series Switches include embedded QoS intelligence to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.
- Networkwide Automatic Voice Deployment: Using a combination of CDP, LLDP-MED, Auto Smartports, and VSDP (Voice Services Discovery Protocol – a unique patent-pending Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice VLAN and QoS parameters and then propagate them out to the phones on the ports where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.
- Advanced network management capabilities: As managed switches, the Cisco 300 Series lets you use a variety of advanced features to control traffic over your network. Features include:
- Static routing/Layer 3 switching between VLANs: This capability allows you to segment your network into separate workgroups and communicate across VLANs without degrading application performance. As a result, you can manage internal routing with your switches and dedicate your router to external traffic and security, helping your network run more efficiently.
- IPv6 support: As the IP network addressing scheme evolves to accommodate more devices, you can make sure that your network is ready. The Cisco 300 Series provides native support for IPv6, the newest version of the Internet Protocol, as well as the previous IPv4 standard. As a result, you will be able to move up to the next generation of networking applications and operating systems without an extensive equipment upgrade.
- Dual image support: With the ability to maintain dual images of your switches, you can perform software upgrades without having to take the network offline and without worrying about an outage during an upgrade.
- Dual Configuration files support: Allows configuring the device, validating that it is configured correctly and then saving this configuration to become effective after reboot. Additionally, a mirror configuration file, providing automatic back-up of the latest stable configuration file maximizes network uptime.
- Remote management: Using Simple Network Management Protocol (SNMP), you can set up and manage all switches and other Cisco devices in your network remotely, instead of having to directly connect to them.
- Additional management options: The switches can be fully managed using the Web GUI or using a full command-line interface (CLI).
- Support for the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
- Automatic power shutoff on ports when a link is down.
- Embedded intelligence to adjust signal strength based on cable length.
- Fanless design in most models, which reduces power consumption, increases reliability, and provides quieter operation.
- LEDs can be turned off to conserve power.
- Expansion ports: The Cisco 300 Series provides more ports per Gigabit Ethernet switch than traditional switch models, giving you more flexibility to connect and empower your business. Gigabit Ethernet models feature 28- and 52-port switches, versus traditional devices that offer 20 or 44 ports with four shared ports giving you more value. The Cisco 300 Series also offers mini gigabit interface converter (mini-GBIC) expansion slots that give you the option to add fiber-optic or Gigabit Ethernet uplink connectivity to the switch. With the ability to increase the connectivity range of the switches, you have more flexibility to design your network around your unique business environment, and to easily connect switches on different floors or across the business.
- Peace of mind and investment protection: Cisco 300 Series Switches offer the reliable performance, investment protection, and peace of mind you expect from a Cisco switch. When you invest in the Cisco 300 Series, you gain the benefit of:
- Cisco limited lifetime warranty with next business day advance replacement (where available).
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2/L3 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
System event log: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 50 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Combo SFP ports quantity: | 2 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
10G support: | ✗ |
Port mirroring: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Spanning tree protocol: | ✓ |
Head-of-line (HOL) blocking: | ✓ |
Cable length detection: | ✓ |
VLAN support: | ✓ |
Virtual LAN features: | Private VLAN |
Number of VLANs: | 4096 |
Data transmission: | |
MAC address table: | 16384 entries |
Switching capacity: | 104 Gbit/s |
Throughput: | 77.38 Mpps |
Number of queues: | 4 |
Jumbo frames support: | ✓ |
Security: | |
DHCP features: | DHCP server,DHCP client |
Access Control List (ACL): | ✓ |
Security algorithms: | 802.1x RADIUS,SNMP,SSH,SSL/TLS |
MAC address filtering: | ✓ |
Static port security: | ✓ |
SSH/SSL support: | ✓ |
BPDU filtering/protection: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMPv1, SNMPv2, SNMPv3, IGMPv1, IGMPv2, IGMPv3 |
Supported network protocols: | IPv4, IPv6, TCP, TFTP, SNMP, RADIUS, DNS, Telnet, DHCP, TACACS |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Reset button: | ✓ |
LED indicators: | Activity, Link, PoE, Speed, System |
Number of fans: | 2 fan(s) |
Certification: | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
Performance: | |
Internal memory: | 128 MB |
Flash memory: | 16 MB |
Noise level: | 40.1 dB |
Minimum system requirements: | Mozilla Firefox version 8 + \nMicrosoft Internet Explorer version 7+\nSafari \nChrome |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 47/63 Hz |
Power consumption (typical): | 45.9 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -20 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Storage relative humidity (H-H): | 10 - 90% |
Heat dissipation: | 156.61 BTU/h |
Weight & dimensions: | |
Width: | 440 mm |
Depth: | 44.5 mm |
Height: | 350 mm |
Weight: | 3.91 kg |
Packaging data: | |
Cables included: | AC, Serial |
Quick start guide: | ✓ |
Resource CD: | ✓ |
Cisco Small Business SF300-24PP-K9-EU network switch Managed L2 Fast Ethernet (10/100) Black Power over Ethernet (PoE)
SF300-24PP-K9
Regular price $150.00 $172.50 incl GST Save $-150.00Cisco Nexus 7000 Switches Supervisor Module w/ 8GB LogFlash & 2GB ExpansionFlash (NX OS 6.2.24a)
N7K-SUP-1
Regular price $200.00 $230.00 incl GST Save $-200.00NetApp NAE-1101 16-Port 10 Gigabit SFP Managed Cluster-Mode Switch, 2x Htplg PSU
NAE-1101
Regular price $375.00 $431.25 incl GST Save $-375.00Cisco Nexus 7000 10-Slot Switch Chassis Only
N7K-C7010
Regular price $2,100.00 $2,415.00 incl GST Save $-2,100.00Cisco ME (ME-3400G-12CS-A) 12-Ports-Ports External Switch Managed
ME-3400G-12CS-A
Regular price $320.00 $368.00 incl GST Save $-320.00With service provider-friendly hardware and mission-specific software, the Cisco ME 3400 Series is the first Cisco access switch family optimized for both Ethernet-to-the-Home (ETTH) triple-play services and Ethernet-to-the-Business (ETTB) VPN services. It provides a complete security solution for Metro Ethernet access that includes subscriber, switch, and network protection. The Cisco ME 3400 Series supports multiple software images to provide a "pay-as-you-grow" deployment model. With service breadth spanning triple-play and Layer 2 and Layer 3 VPN services, lower total cost of ownership (TCO) and operating expenses can be achieved from a single ETTH and ETTB access solution.
- 12 dual-purpose (10/100/1000 and SFP) ports.
- 4 SFP-based Gigabit Ethernet and 100BASE-X ports.
- Dual fixed redundant AC power supplies.
- 26-mpps forwarding rate.
- 1-RU multilayer switch.
- Gigabit Ethernet access switch for the Metro Ethernet market.
- 3 Cisco IOS Software feature image options (METROBASE, METROACCESS, and METROIPACCESS).
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2/L3 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 12 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Combo SFP ports quantity: | 16 |
Network: | |
Networking standards: | IEEE 802.1ag,IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ah,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
IP routing: | ✓ |
Rate limiting: | ✓ |
Spanning tree protocol: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 32 Gbit/s |
Throughput: | 26 Mpps |
Security: | |
DHCP features: | DHCP server,DHCP client |
Access Control List (ACL): | ✓ |
IGMP snooping: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Number of multicast groups filtered: | 1000 |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
LED indicators: | ✓ |
Safety: | UL 60950, UL - CAN/CSA 22.2 No.60950, TUV/GS - EN 60950, A1-A4 & A11, CB to IEC 60950, NOM - NOM-019-SCFI, AS/NZS 3260, TS001, CE Marking, CLEI Coding |
Electromagnetic compatibility: | FCC, EN 55022B, EN 55024, EN 300 386, GR-1089 CORE, VCCI, AS/NZS 3548 |
Performance: | |
Internal memory: | 128 MB |
Flash memory: | 32 MB |
Noise level: | 48 dB |
Mean time between failures (MTBF): | 247563 h |
Power: | |
Redundant power supply (RPS) support: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Input current: | 0.8 - 1.6 A |
Power consumption (typical): | 65 W |
Power consumption (max): | 80 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 50 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 5 - 95% |
Operating altitude: | 0 - 4000 m |
Non-operating altitude: | 0 - 4570 m |
Heat dissipation: | 273 BTU/h |
Weight & dimensions: | |
Width: | 445 mm |
Depth: | 279 mm |
Height: | 44 mm |
Weight: | 4.2 kg |
HP Hewlett Packard Enterprise V1910-24G-PoE (365W) Managed L3 Gigabit Ethernet (10/100/1000) Black 1U Power over Ethernet (PoE) SWITCH
JE007A
Regular price $310.00 $356.50 incl GST Save $-310.00Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✗ |
Port mirroring: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
Data transmission: | |
MAC address table: | 8192 entries |
Switching capacity: | 56 Gbit/s |
Throughput: | 41.7 Mpps |
Latency (10-100 Mbps): | 5 µs |
Latency (1 Gbps): | 5 µs |
Security: | |
DHCP features: | DHCP client |
IGMP snooping: | ✓ |
MAC address filtering: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 523 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Total Power over Ethernet (PoE) budget: | 365 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 442 mm |
Depth: | 420.1 mm |
Height: | 43.2 mm |
Weight: | 3.08 kg |
HP Ethernet Switch 24-port
JE033A
Regular price $250.00 $287.50 incl GST Save $-250.00Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Fast Ethernet (copper) ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✗ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
Switching capacity: | 8.8 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 6600000 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Design: | |
Product colour: | Black |
Safety: | CSA 22.2 N 60950; UL 60950-1; IEC 60950-1; EN 60950-1 |
Certification: | VCCI, |
Performance: | |
Built-in processor: | ✓ |
Processor model: | Broadcom BCM4704 |
Processor frequency: | 200 MHz |
Memory type: | SDRAM |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Power over Ethernet (PoE) ports quantity: | 24 |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 95% |
Weight & dimensions: | |
Width: | 429.3 mm |
Depth: | 439.4 mm |
Height: | 43.2 mm |
Weight: | 6.08 kg |
Other features: | |
Dimensions (WxDxH): | 429.3 x 439.4 x 43.2 mm |
HP Hewlett Packard Enterprise V V1910-24G Managed L2+ Switch
JE006A
Regular price $105.00 $120.75 incl GST Save $-105.00Features
- IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification mapped to four hardware queues per port
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
- Class of service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
- Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
- Simple Web management: intuitive Web GUI allows for easy management of device by even nontechnical users
- Single IP management: enables management of up to 32 V1910 devices using a single Web interface; simplifies management of multiple devices
- Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
- SNMPv1, v2c, and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
- Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
- Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
- IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
- * IEEE 802.3af Power over Ethernet (PoE) ready: PWR models able to provide up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more
- Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds
- Jumbo Frames: allow high-performance remote backup, server links, and disaster-recovery services
- Half-/Full-duplex autonegotiating capability on every port: doubles the throughput of every port
- Advanced QoS and traffic shaping: provides traffic prioritization using IEEE 802.1p Quality of Service (QoS) and Type of Service (TOS)with Differentiated Services Code Point (DSCP) and ingress/egress rate shaping to help ensure that critical time-sensitive traffic like voice receives the priority needed for qualitycommunications
- VLANs: segment the network by grouping users based on their data or traffic exchangerequirements; help ensure improved use of available bandwidth as traffic flow is directedaccording to the needs of the business
- Link aggregation (trunking): groups together up to 8 ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the networkbackbone; helps prevent traffic bottlenecks
- Selectable queue configurations: increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications
- IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links
- IEEE 802.1D Spanning Tree Protocol (STP): provides redundant links while preventing network loops
- IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees
- Link aggregation (trunking): groups together up to 8 ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the networkbackbone; helps prevent traffic bottlenecks
- Redundant Power Supply (365 PWR model only): DC power supply provides additional PoE budget of up to 740 W for high power applications like Gigabit IntelliJack switches
- VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
- Jumbo packet support: supports up to 9220-byte frame size to improve performance of large data transfers
- Spanning Tree: fully supports standard IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol
- Port mirroring: duplicates port traffic (ingress and egress) to a local or remote monitoring port
- BPDU tunneling: transmits Spanning Tree Protocol BPDUs transparently, allowing correct tree calculations across service providers, WANs, or MANs
- User Datagram Protocol (UDP) helper function: allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
- Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2+ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 56 Gbit/s |
Throughput: | 41.7M pps |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
MAC address filtering: | ✓ |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Design: | |
Stackable: | ✓ |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Weight: | 3.08 kg |
Other features: | |
Latency: | 100 Mb Latency: < 5 µs; 1000 Mb Latency: < 5 µs |
Dimensions (WxDxH): | 160 x 442 x 43.2 mm |
Connectivity technology: | Wired |
Authentication method: | IEEE 802.1X, RADIUS |
Input frequency: | 50/60 Hz |
Input voltage: | 100 - 240 V |
HP Hewlett Packard Enterprise A 5120-24G-PoE+ EI 24/4SFP 1GbE Black Power over Ethernet (PoE) Switch
JG236A
Regular price $260.00 $299.00 incl GST Save $-260.00- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
- Friendly port names: allow assignment of descriptive names to ports
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
- Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
- Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance
- 16K MAC address table: provides access to many Layer 2 devices
- Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 144 Gbit/s |
Supported data transfer rates: | 10/100/1000 |
Design: | |
Rack mounting: | ✓ |
Product colour: | Black |
Power: | |
Power consumption (typical): | 495 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Heat dissipation: | 425 BTU/h |
Weight & dimensions: | |
Width: | 439.9 mm |
Depth: | 420.1 mm |
Height: | 43.7 mm |
Weight: | 7 kg |
Hewlett Packard Enterprise E4500-48 Switch Managed L2 White 10/100 Ethernet
JE046A
Regular price $455.00 $523.25 incl GST Save $-455.00- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network management applications. Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bi-directional link into uni-directional; this prevents network problems such as loops. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module vi
- Gigabit Uplinks: E4500-24 model has two dual-personality ports for either 10/100/1000 or mini-GBIC SFP connectivity; other models have dual-personality dual mini-GBIC Gigabit SFP ports and ship with two 1000Base-T SFP transceivers for copper Ethernet connections. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
- RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading. Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI). Web interface: allows configuration of the switch from any Web browser on the network. Multiple configuration files: allow multiple configuration files to be stored to flash image.
- VLAN support and tagging: supports IEEE 802.1Q, with 4094 simultaneous VLAN IDs. GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs. Jumbo packet support: supports up to 9220-byte frame size to improve performance of large data transfers. IEEE 802.1ad QinQ: increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Web-based management: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 2 |
Power connector: | DC-in jack |
Network: | |
10G support: | ✗ |
Full duplex: | ✓ |
Data transmission: | |
MAC address table: | 2000 entries |
Switching capacity: | 13.6 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 10.1 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Packet buffer memory: | 32 MB |
Protocols: | |
Management protocols: | SNMP |
Design: | |
Stackable: | ✓ |
Product colour: | White |
Certification: | FCC, RoHS |
Performance: | |
Built-in processor: | ✓ |
Processor model: | Broadcom BCM5836 |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 95% |
Weight & dimensions: | |
Weight: | 3.31 kg |
Other features: | |
Dimensions (WxDxH): | 269.2 x 439.4 x 43.2 mm |
Connectivity technology: | Wired |
Power requirements: | 100-240 V, 50-60 Hz |
Networking features: | Gigabit Ethernet |
HP H3C 5120-24G EI Switch w/2 intfce slt
JE068A
Regular price $455.00 $523.25 incl GST Save $-455.00- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Powerful QoS feature: supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR. Traffic policing: supports Committed Access Rate (CAR) and line rate.
- Friendly port names: allow assignment of descriptive names to ports. Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI). Manager and operator privilege levels: enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces. Command authorization: leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS.
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. Flow control: using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic situations. Jumbo packet support: supports up to 9216-byte frame size to improve the performance of large data transfers. High-density connectivity: provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch. Optional 10 GbE ports: through the use of optional modules, additional 10 GbE connections are available for uplinks or high-bandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections.
- Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput. Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps ensure high levels of security and ease of administration without impacting network performance.
- Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance. External redundant power supply: provides high reliability. Smart link: allows 50 ms failover between links. Spanning Tree/MSTP, RSTP: provides redundant links while preventing network loops. Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications.
- 16K MAC address table: provides access to many Layer 2 devices. VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs. GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. IEEE 802.1ad QinQ and Selective QinQ: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network. 10 GbE port aggregation: allows grouping of ports to increase overall data throughput to a remote device.
Specs | |
Management features: | |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Full duplex: | ✓ |
Routing entries: | 32 |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 144 Gbit/s |
Supported data transfer rates: | 10/100/1000 |
Maximum data transfer rate: | 10 Gbit/s |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 106 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 440 mm |
Depth: | 300 mm |
Height: | 43.6 mm |
Weight: | 4.5 kg |
HP 1910-48G 48+4 SFP 1GbE Switch
JE009A
Regular price $225.00 $258.75 incl GST Save $-225.00Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 8192 entries |
Switching capacity: | 104 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 77.4 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 59.8 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 260.1 mm |
Depth: | 442 mm |
Height: | 43.2 mm |
Weight: | 3.08 kg |
Other features: | |
Management platform: | IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
Latency: | 5 µs |
Connectivity technology: | Wired |
HP H3C 5800-24G (4Ports x10Gb) Switch
JC100A
Regular price $825.00 $948.75 incl GST Save $-825.00
- Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR. Integrated network services: with support for open application architecture (OAA) modules, extends and integrates application capability into the network. Ring Resiliency Protection Protocol (RRPP): provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as VOIP.
- Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI). IEEE 802.1ab LLDP discovery: advertises and receives management information from adjacent devices on a network. USB support: File copy: allows users to copy switch files to and from a USB flash drive. DHCP options: - DNS Relay and SMTP Redirection. - DHCP: Server (RFC 2131), Client, and Option-82 Relay (RFC 3046). sFlow: provides scalable, ASIC-based, networkmonitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes.
- High-density port connectivity: supports up to 84 1-Gigabit ports per unit/612 per stack. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports. Jumbo frames: on Gigabit Ethernet and 10-Gigabit ports, they allow high-performance remote backup and disaster recovery services. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. Medium Power over Ethernet (PoE): supports a medium Power over Ethernet (PoE) power supply, with each port providing up to 30 W of output power.
- Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high levels of security and ease of administration without impacting network performance. Unique Flex-Chassis Architecture: supports the best of both fixed chassis and modular configurations.
- Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI). Web interface: allows configuration of the switch from any Web browser on the network. RMON and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Multiple configuration files: allow multiple configuration files to be stored to a flash image. Troubleshooting: Ingress and egress port monitoring: enable network problem solving. Tracert and Ping: enable testing of network connectivity. Virtual Cable Tests: provide visibility to cable problems.
- GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. 32K MAC addresses: provide access to many Layer 2 devices. 4,094 port-based VLANs: provide security between workgroups. IEEE 802.1ad QinQ and Selective QinQ: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network. Gigabit Ethernet port aggregation: allows grouping of ports to increase overall data throughput to a remote device.
Specs | |
Management features: | |
Switch layer: | L3 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
SFP/SFP+ slots quantity: | 4 |
SFP+ module slots quantity: | 4 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✓ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
IP routing: | ✓ |
Flow control support: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 32000 entries |
Switching capacity: | 208 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 155 mpps |
Packet buffer memory: | 4 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Protocols: | |
Management protocols: | IMC, SNMP, Telnet, HTTPS, RMON1, FTP |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✗ |
Product colour: | Black |
Form factor: | 1U |
LED indicators: | ✓ |
Safety: | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance |
Electromagnetic compatibility: | VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A |
Certification: | RoHs |
Performance: | |
Memory type: | SDRAM |
Internal memory: | 512 MB |
Flash memory: | 512 MB |
Noise level: | 52.9 dB |
Power: | |
Power consumption (typical): | 15.4 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Heat dissipation: | 358 BTU/h |
Weight & dimensions: | |
Weight: | 6 kg |
Other features: | |
Latency: | 4.02 µs |
Dimensions (WxDxH): | 467 x 440 x 43.6 mm |
Power supply type: | AC |
Networking features: | Gigabit Ethernet |
Wi-Fi: | ✓ |
Power LED: | ✓ |
Input frequency: | 50 / 60 Hz |
Input voltage: | 100 - 240 V |
Expansion slots: | 4x SFP + 1 Exp sl |
Weight (imperial): | 6 kg (13.2 lbs) |
Dimensions (W x D x H) (imperial): | 364.5 x 439.9 x 43.7 mm (14.3 x 17.3 x 1.72") |