The HP E6200-24G-mGBIC yl Switch is an advanced Layer 3 stackable switch in 1U height. It has 24 mini-GBIC slots and an expansion slot for an optional 4-port 10-GbE module. Designed to be deployed as an aggregator of traffic from the edge to the core of the network, this switch supports a variety of Gigabit mini-GBICs, such as SX, LX, LH, and 1000Base-T. The foundation for this switch is a purpose-built ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion. With its high-performance architecture, 10-GbE capability, and programmable ASIC, this switch offers excellent investment protection, flexibility, and scalability.
- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis. Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers. Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues. Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced maximum bandwidth. Classifier-based rate limiting: uses access control list (AC
- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP E8200 zl, E6600, E6200 yl, E5400 zl, or E3500 switch anywhere on the network. RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network management applications. Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network administrator's
- IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. Dual stack (IPv4/IPv6): transitions from IPv4 to IPv6, supporting connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic, preventing traffic flooding. IPv6 routing: supports static and OSPFv3 routing protocols . Jumbo frames: on Gigabit and 10-Gigabit ports, they allow high-performance remote backup and disaster recovery services.
- High-speed/capacity architecture: 105.6 Gbps crossbar switching fabric provides intra- and inter-module switching with 75.7 million pps throughput on the purpose-built Provision ASICs. Selectable queue configurations: allow you to increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications.
- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis. Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers. Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues. Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced maximum bandwidth. Classifier-based rate limiting: uses access control list (AC
- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP E8200 zl, E6600, E6200 yl, E5400 zl, or E3500 switch anywhere on the network. RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network management applications. Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network administrator's
- IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. Dual stack (IPv4/IPv6): transitions from IPv4 to IPv6, supporting connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic, preventing traffic flooding. IPv6 routing: supports static and OSPFv3 routing protocols . Jumbo frames: on Gigabit and 10-Gigabit ports, they allow high-performance remote backup and disaster recovery services.
- High-speed/capacity architecture: 105.6 Gbps crossbar switching fabric provides intra- and inter-module switching with 75.7 million pps throughput on the purpose-built Provision ASICs. Selectable queue configurations: allow you to increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Console port: | RS-232 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1v,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ad,IEEE 802.3x |
IP routing: | ✓ |
Flow control support: | ✓ |
Data transmission: | |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
DHCP features: | DHCP server,DHCP client |
IGMP snooping: | ✓ |
Security algorithms: | SSH,SSL/TLS |
Protocols: | |
Management protocols: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Form factor: | 1U |
Performance: | |
Processor frequency: | 666 MHz |
Power: | |
Power consumption (typical): | 243 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 55 °C |
Operating relative humidity (H-H): | 15 - 95% |
Weight & dimensions: | |
Weight: | 6.4 kg |
Other features: | |
Dimensions (WxDxH): | 391 x 442 x 43 mm |
Connectivity technology: | Wired |
Networking features: | Gigabit Ethernet |
Authentication method: | SSH, SSH2, RADIUS, TACACS+ |
Input frequency: | 50 / 60 Hz |
Input voltage: | 120 / 230 V |