HP 1910 switches are advanced smart managed fixed-configuration Gigabit and Fast Ethernet switches designed for small businesses in an easy-to-administer solution. The series has 8 gigabit models and 5 Fast Ethernet models. The gigabit models are : 8-, 16-, 24-, and 48-port 10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. Gigabit models have additional true Gigabit SFP ports for fiber connectivity. The Fast Ethernet models are : 8-. 24- and 48- 10/100 non-PoE models and 8-, 24- 10/100 PoE+ models. The Fast Ethernet models come with additional 2 combo uplink ports . All HP 1910 models support rack mounting or desktop operation. Customizable features include basic layer 2 features like VLANs and link aggregation as well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols. HP 1910 switches come with a lifetime warranty covering the unit, fans, and power supplies.
Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 8192 entries |
Switching capacity: | 104 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 77.4 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 59.8 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 260.1 mm |
Depth: | 442 mm |
Height: | 43.2 mm |
Weight: | 3.08 kg |
Other features: | |
Management platform: | IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
Latency: | 5 µs |
Connectivity technology: | Wired |