Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features.
- 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance.
- Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks.
- FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional).
- Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget.
- Reduced power consumption and advanced energy management features.
- USB and Ethernet management interfaces for simplified operations.
- Application visibility and capacity planning with integrated NetFlow-Lite.
- LAN Base or LAN Lite Cisco IOS® software features.
- Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement.
- 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance.
- Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks.
- FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional).
- Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget.
- Reduced power consumption and advanced energy management features.
- USB and Ethernet management interfaces for simplified operations.
- Application visibility and capacity planning with integrated NetFlow-Lite.
- LAN Base or LAN Lite Cisco IOS® software features.
- Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement.
| Specs | |
| Management features: | |
| Switch type: | Managed |
| Switch layer: | L2 |
| Quality of Service (QoS) support: | ✓ |
| Web-based management: | ✓ |
| Ports & interfaces: | |
| Basic switching RJ-45 Ethernet ports quantity: | 24 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| SFP+ module slots quantity: | 2 |
| Console port: | RJ-45 |
| USB 2.0 ports quantity: | 2 |
| Network: | |
| Networking standards: | IEEE 802.1ab,IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| 10G support: | ✓ |
| Full duplex: | ✓ |
| Link aggregation: | ✓ |
| Broadcast storm control: | ✓ |
| Rate limiting: | ✓ |
| Auto MDI/MDI-X: | ✓ |
| Spanning tree protocol: | ✓ |
| VLAN support: | ✓ |
| Number of VLANs: | 1023 |
| Data transmission: | |
| Switching capacity: | 216 Gbit/s |
| Jumbo frames support: | ✓ |
| Security: | |
| DHCP features: | DHCP server |
| Access Control List (ACL): | ✓ |
| IGMP snooping: | ✓ |
| SSH/SSL support: | ✓ |
| Multicast features: | |
| Multicast support: | ✓ |
| Design: | |
| Rack mounting: | ✓ |
| Stackable: | ✓ |
| Product colour: | Black |
| LED indicators: | ✓ |
| Safety: | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1 |
| Performance: | |
| Built-in processor: | ✓ |
| Processor model: | AppliedMicro APM8639 |
| Processor frequency: | 600 MHz |
| Memory type: | DRAM |
| Internal memory: | 512 MB |
| Flash memory: | 128 MB |
| Noise level: | 43 dB |
| Mean time between failures (MTBF): | 569520 h |
| Power: | |
| Redundant power supply (RPS) support: | ✓ |
| Number of power supply units: | 1 |
| AC input voltage: | 100 - 240 V |
| AC input frequency: | 50 - 60 Hz |
| Power consumption (typical): | 32.3 W |
| Operational conditions: | |
| Operating temperature (T-T): | -5 - 40 °C |
| Storage temperature (T-T): | -25 - 70 °C |
| Operating relative humidity (H-H): | 10 - 95% |
| Storage relative humidity (H-H): | 10 - 95% |
| Operating altitude: | 0 - 3000 m |
| Non-operating altitude: | 0 - 4000 m |
| Weight & dimensions: | |
| Width: | 445 mm |
| Depth: | 279 mm |
| Height: | 45 mm |
| Weight: | 4 kg |
| Other features: | |
| Power LED: | ✓ |
