- 3Com
- Add-on Card
- Allied Telesis
- Brocade
- Cisco
- D-Link
- Dell
- Disk Arrays
- Edgecore 24 x
- EMC
- Generic
- Hewlett Packard
- Hewlett Packard Enterprise
- HP
- IBM
- KVM Switches
- Linksys
- NetApp
- Netgear
- Network
- Network Equipment Chassis
- Network Switch Components
- Network Switch Modules
- Network Switches
- Other
- Planet
- Power Supply Units
- PSU
- Refurb Server
- Refurb Storage
- SFP
- SMC
- Switch
- 3Com
- Add-on Card
- Allied Telesis
- Brocade
- Cisco
- D-Link
- Dell
- Disk Arrays
- Edgecore 24 x
- EMC
- Generic
- Hewlett Packard
- Hewlett Packard Enterprise
- HP
- IBM
- KVM Switches
- Linksys
- NetApp
- Netgear
- Network
- Network Equipment Chassis
- Network Switch Components
- Network Switch Modules
- Network Switches
- Other
- Planet
- Power Supply Units
- PSU
- Refurb Server
- Refurb Storage
- SFP
- SMC
- Switch
40 products
HP 2520-24-PoE Switch (J9138A)
J9138A
Regular price $60.00 $69.00 incl GST Save $-60.00Quality of Service (QoS)
• Selectable queue configuration: increases performance and/or traffic reliability by selecting the number of queues that best meet the requirements of your network applications; switch will map 8 priorities to either 2 or 4 queues
Management
• Choice of management interfaces: Web graphical user interface (GUI): easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): robust command-line interface provides advanced configuration and diagnostics. Simple Network Management Protocol (SNMPv2c/SNMPv3): allows switch to be managed with a variety of third-party network management applications.
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all ports
Performance
• Switch on a chip: provides highly integrated, high-performance switch design with a non-blocking architecture
Resiliency and high availability
• Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections. IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.
Layer 2 switching
• VLAN support and tagging: supports the IEEE 802.1Q (4,094 VLAN IDs) and up to 256 port-based VLANs simultaneously
Security
• Manager and operator privilege levels: enables read-only (operator) and read-write (manager) access on management interfaces
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
System event log: | ✓ |
MIB support: | MIB II, Bridge MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Gigabit Ethernet (copper) ports quantity: | 2 |
Combo SFP ports quantity: | 2 |
SFP/SFP+ slots quantity: | 2 |
Console port: | RS-232 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x |
10G support: | ✗ |
Copper ethernet cabling technology: | 1000BASE-T,1000BASE-TX,100BASE-TX,10BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 12.8 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 9.5 Mpps |
Number of queues: | 4 |
Maximum data transfer rate: | 1 Gbit/s |
Packet buffer memory: | 0.384 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
IGMP snooping: | ✓ |
Security algorithms: | 802.1x RADIUS,SSH,SSL/TLS |
MAC address filtering: | ✓ |
Static port security: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | IGMPv3, LLDP, SNMPv1/v2c/v3 |
Supported network protocols: | IPv6, UDP, TFTP, ICMP, TCP, ARP, Telnet, BOOTP, SNTPv4 |
Design: | |
Safety: | cUL, CE, UL, CAN/CSA, EN, AS/NZS, IEC |
Electromagnetic compatibility: | FCC, VCCI, EN, CISPR 22, AS/NZS, IEC/EN |
Performance: | |
Built-in processor: | ✓ |
Processor model: | PowerPC MPC8313 |
Processor frequency: | 266 MHz |
Memory type: | DDR2-SDRAM |
Internal memory: | 128 MB |
Flash memory: | 32 MB |
Noise level: | 27.9 dB |
Power: | |
Input current: | 1.6 - 3.3 A |
Power consumption (typical): | 257 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 95% |
Operating altitude: | 0 - 3000 m |
Heat dissipation: | 208 BTU/h |
Weight & dimensions: | |
Weight: | 3.22 kg |
Other features: | |
Latency: | 1.9µs/1.5µs |
Dimensions (WxDxH): | 246.1 x 443 x 44.5 mm |
Connectivity technology: | Wired |
Networking features: | Gigabit Ethernet |
Wi-Fi: | ✗ |
Input frequency: | 50/60 Hz |
Input voltage: | 100 - 240 V |
Acoustic pressure emissions: | 36 dB |
Weight (imperial): | 3.22 kg (7.1 lbs) |
Dimensions (W x D x H) (imperial): | 443 x 246.1 x 44.5 mm (17.4 x 9.69 x 1.75") |
HP 5120-48G-PoE EI 48/4SFP 1GbE PPoE+ Switch
JE071A
Regular price $375.00 $431.25 incl GST Save $-375.00Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network
Management
• Friendly port names: allow assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 176 Gbps nonblocking switching fabric provides wire-speed switching with up to 130 million pps throughput
Resiliency and high availability
• Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
HP ProCurve 1810-48G 48+4 SFP 1GbE Switch
J9660A
Regular price $275.00 $316.25 incl GST Save $-275.00HP 1810 switch series devices are basic smart managed fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution. The series has three models: 8-, 24-, and 48-port 10/100/1000 switches. The 24-port model includes two dual-purpose combo SFP ports, and the 48-port model has four additional true Gigabit Ethernet SFP ports (52 total active ports) for fiber connectivity. All models support flexible deployment options, including mounting on walls or ceilings, under tables, or desktop operation, and come with an anti-theft protection Kensington Lock slot (lock not included). The 8-port model can optionally be powered by an upstream Power over Ethernet (PoE) switch. HP 1810 switches support QoS traffic prioritization and security features such as denial-of-service prevention. Customizable features include VLANs and link aggregation trunking. HP 1810 switches come with lifetime warranty.
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification witheight priority levels mapped to four queues. Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
Simple Web management: intuitive Web GUI allows for easy management of device by even nontechnical users. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. SNMPv1, v2c: devices can be discovered and monitored from an SNMP management station. Dual flash images: provide independent primary and secondary operating system files for backup while upgrading. Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring.
Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. Non-shared SFP ports (1810-48G switch): four true SFP ports for optional fiber connectivity such asGigabit-SX, -LX, or 100-FX; also support SFP 1G RJ-45 copper connections. Dual-personality ports (1810-24G switch): two Gigabit Ethernet copper ports or SFP slots for optional fiber connectivity such as Gigabit-SX and -LX, or 100-FX. IEEE 802.3af PoE-powered device option (1810-8G switch): can obtain power from a standard PoE device on Port 1, making the switch ideal for deployments where a power outlet is not available; such flexibility helps you to extend the network to wherever an Ethernet cable can reach. Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds.
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port. Link aggregation (trunking): brings together groups of ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks; the 1810-8G switch has four trunks of four links each, the 1810-24G switch has eight trunks of four links each, and the 1810-48G switch has 16 trunks of eight links each. Fiber uplink: available on 24- and 48-port models; provides greater distance connectivity using Gigabit Ethernet fiber uplinks.
VLAN support and tagging: support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security between workgroups. Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers.
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. Automatic denial-of-service protection: monitors six types of malicious attacks and protects the network by blocking the attacks. Management password: provides security so that only authorized access to the Web browser interface is allowed.
Specs | |
Management features: | |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3 |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 104 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 77.4 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Jumbo frames support: | ✓ |
Packet buffer memory: | 1.5 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Design: | |
Rack mounting: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 |
Performance: | |
Memory type: | SDRAM |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 60 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Heat dissipation: | 204 BTU/h |
Weight & dimensions: | |
Width: | 442 mm |
Depth: | 249 mm |
Height: | 46 mm |
Weight: | 2.86 kg |
Packaging data: | |
User guide: | ✓ |
Other features: | |
Latency: | 8.4, 3.2 |
Dimensions (WxDxH): | 247.7 x 442 x 44.5 mm |
Power supply type: | AC |
Power LED: | ✓ |
Input frequency: | 50 - 60 Hz |
Input voltage: | 100-127/200-240 VAC |
Ethernet LAN: | ✓ |
Ethernet interface type: | Gigabit Ethernet |
JG937A HP FlexNetwork 5130 EI 48 port 1GbE + 4prt 10GbE SFP+ PPoE+ L3 Managed Switch
JG937A
Regular price $900.00 $1,035.00 incl GST Save $-900.00HPE FlexNetwork 5130 EI Switch Series
The HPE FlexNetwork 5130 EI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) interfaces. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
HP Hewlett Packard Enterprise V1910-24G-PoE (365W) Managed L3 Gigabit Ethernet (10/100/1000) Black 1U Power over Ethernet (PoE) SWITCH
JE007A
Regular price $310.00 $356.50 incl GST Save $-310.00Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✗ |
Port mirroring: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
Data transmission: | |
MAC address table: | 8192 entries |
Switching capacity: | 56 Gbit/s |
Throughput: | 41.7 Mpps |
Latency (10-100 Mbps): | 5 µs |
Latency (1 Gbps): | 5 µs |
Security: | |
DHCP features: | DHCP client |
IGMP snooping: | ✓ |
MAC address filtering: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 523 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Total Power over Ethernet (PoE) budget: | 365 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 442 mm |
Depth: | 420.1 mm |
Height: | 43.2 mm |
Weight: | 3.08 kg |
HP Ethernet Switch 24-port
JE033A
Regular price $250.00 $287.50 incl GST Save $-250.00Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Fast Ethernet (copper) ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✗ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
Switching capacity: | 8.8 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 6600000 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Design: | |
Product colour: | Black |
Safety: | CSA 22.2 N 60950; UL 60950-1; IEC 60950-1; EN 60950-1 |
Certification: | VCCI, |
Performance: | |
Built-in processor: | ✓ |
Processor model: | Broadcom BCM4704 |
Processor frequency: | 200 MHz |
Memory type: | SDRAM |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Power over Ethernet (PoE) ports quantity: | 24 |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 95% |
Weight & dimensions: | |
Width: | 429.3 mm |
Depth: | 439.4 mm |
Height: | 43.2 mm |
Weight: | 6.08 kg |
Other features: | |
Dimensions (WxDxH): | 429.3 x 439.4 x 43.2 mm |
HP Hewlett Packard Enterprise V V1910-24G Managed L2+ Switch
JE006A
Regular price $105.00 $120.75 incl GST Save $-105.00Features
- IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification mapped to four hardware queues per port
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
- Class of service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
- Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
- Simple Web management: intuitive Web GUI allows for easy management of device by even nontechnical users
- Single IP management: enables management of up to 32 V1910 devices using a single Web interface; simplifies management of multiple devices
- Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
- SNMPv1, v2c, and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
- Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
- Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
- IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
- * IEEE 802.3af Power over Ethernet (PoE) ready: PWR models able to provide up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more
- Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds
- Jumbo Frames: allow high-performance remote backup, server links, and disaster-recovery services
- Half-/Full-duplex autonegotiating capability on every port: doubles the throughput of every port
- Advanced QoS and traffic shaping: provides traffic prioritization using IEEE 802.1p Quality of Service (QoS) and Type of Service (TOS)with Differentiated Services Code Point (DSCP) and ingress/egress rate shaping to help ensure that critical time-sensitive traffic like voice receives the priority needed for qualitycommunications
- VLANs: segment the network by grouping users based on their data or traffic exchangerequirements; help ensure improved use of available bandwidth as traffic flow is directedaccording to the needs of the business
- Link aggregation (trunking): groups together up to 8 ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the networkbackbone; helps prevent traffic bottlenecks
- Selectable queue configurations: increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications
- IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links
- IEEE 802.1D Spanning Tree Protocol (STP): provides redundant links while preventing network loops
- IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees
- Link aggregation (trunking): groups together up to 8 ports automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the networkbackbone; helps prevent traffic bottlenecks
- Redundant Power Supply (365 PWR model only): DC power supply provides additional PoE budget of up to 740 W for high power applications like Gigabit IntelliJack switches
- VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
- Jumbo packet support: supports up to 9220-byte frame size to improve performance of large data transfers
- Spanning Tree: fully supports standard IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol
- Port mirroring: duplicates port traffic (ingress and egress) to a local or remote monitoring port
- BPDU tunneling: transmits Spanning Tree Protocol BPDUs transparently, allowing correct tree calculations across service providers, WANs, or MANs
- User Datagram Protocol (UDP) helper function: allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
- Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2+ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 56 Gbit/s |
Throughput: | 41.7M pps |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
MAC address filtering: | ✓ |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Design: | |
Stackable: | ✓ |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Weight: | 3.08 kg |
Other features: | |
Latency: | 100 Mb Latency: < 5 µs; 1000 Mb Latency: < 5 µs |
Dimensions (WxDxH): | 160 x 442 x 43.2 mm |
Connectivity technology: | Wired |
Authentication method: | IEEE 802.1X, RADIUS |
Input frequency: | 50/60 Hz |
Input voltage: | 100 - 240 V |
HP Hewlett Packard Enterprise A 5120-24G-PoE+ EI 24/4SFP 1GbE Black Power over Ethernet (PoE) Switch
JG236A
Regular price $260.00 $299.00 incl GST Save $-260.00- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
- Friendly port names: allow assignment of descriptive names to ports
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
- Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
- Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance
- 16K MAC address table: provides access to many Layer 2 devices
- Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 144 Gbit/s |
Supported data transfer rates: | 10/100/1000 |
Design: | |
Rack mounting: | ✓ |
Product colour: | Black |
Power: | |
Power consumption (typical): | 495 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Heat dissipation: | 425 BTU/h |
Weight & dimensions: | |
Width: | 439.9 mm |
Depth: | 420.1 mm |
Height: | 43.7 mm |
Weight: | 7 kg |
Hewlett Packard Enterprise E4500-48 Switch Managed L2 White 10/100 Ethernet
JE046A
Regular price $455.00 $523.25 incl GST Save $-455.00- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network management applications. Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bi-directional link into uni-directional; this prevents network problems such as loops. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module vi
- Gigabit Uplinks: E4500-24 model has two dual-personality ports for either 10/100/1000 or mini-GBIC SFP connectivity; other models have dual-personality dual mini-GBIC Gigabit SFP ports and ship with two 1000Base-T SFP transceivers for copper Ethernet connections. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
- RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading. Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI). Web interface: allows configuration of the switch from any Web browser on the network. Multiple configuration files: allow multiple configuration files to be stored to flash image.
- VLAN support and tagging: supports IEEE 802.1Q, with 4094 simultaneous VLAN IDs. GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs. Jumbo packet support: supports up to 9220-byte frame size to improve performance of large data transfers. IEEE 802.1ad QinQ: increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Web-based management: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 2 |
Power connector: | DC-in jack |
Network: | |
10G support: | ✗ |
Full duplex: | ✓ |
Data transmission: | |
MAC address table: | 2000 entries |
Switching capacity: | 13.6 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 10.1 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Packet buffer memory: | 32 MB |
Protocols: | |
Management protocols: | SNMP |
Design: | |
Stackable: | ✓ |
Product colour: | White |
Certification: | FCC, RoHS |
Performance: | |
Built-in processor: | ✓ |
Processor model: | Broadcom BCM5836 |
Internal memory: | 64 MB |
Flash memory: | 8 MB |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 95% |
Weight & dimensions: | |
Weight: | 3.31 kg |
Other features: | |
Dimensions (WxDxH): | 269.2 x 439.4 x 43.2 mm |
Connectivity technology: | Wired |
Power requirements: | 100-240 V, 50-60 Hz |
Networking features: | Gigabit Ethernet |
HP H3C 5120-24G EI Switch w/2 intfce slt
JE068A
Regular price $455.00 $523.25 incl GST Save $-455.00- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Powerful QoS feature: supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR. Traffic policing: supports Committed Access Rate (CAR) and line rate.
- Friendly port names: allow assignment of descriptive names to ports. Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI). Manager and operator privilege levels: enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces. Command authorization: leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS.
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. Flow control: using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic situations. Jumbo packet support: supports up to 9216-byte frame size to improve the performance of large data transfers. High-density connectivity: provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch. Optional 10 GbE ports: through the use of optional modules, additional 10 GbE connections are available for uplinks or high-bandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections.
- Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput. Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps ensure high levels of security and ease of administration without impacting network performance.
- Separate data and control paths: keeps control separated from services and keeps service processing isolated; increases security and performance. External redundant power supply: provides high reliability. Smart link: allows 50 ms failover between links. Spanning Tree/MSTP, RSTP: provides redundant links while preventing network loops. Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications.
- 16K MAC address table: provides access to many Layer 2 devices. VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs. GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. IEEE 802.1ad QinQ and Selective QinQ: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network. 10 GbE port aggregation: allows grouping of ports to increase overall data throughput to a remote device.
Specs | |
Management features: | |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Full duplex: | ✓ |
Routing entries: | 32 |
Data transmission: | |
MAC address table: | 32 entries |
Switching capacity: | 144 Gbit/s |
Supported data transfer rates: | 10/100/1000 |
Maximum data transfer rate: | 10 Gbit/s |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 106 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 440 mm |
Depth: | 300 mm |
Height: | 43.6 mm |
Weight: | 4.5 kg |
HP 1910-48G 48+4 SFP 1GbE Switch
JE009A
Regular price $225.00 $258.75 incl GST Save $-225.00Management
• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Connectivity
• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Security
• Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Performance
• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Layer 2 switching
• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
SFP/SFP+ slots quantity: | 4 |
SFP module slots quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Full duplex: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 8192 entries |
Switching capacity: | 104 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 77.4 Mpps |
Maximum data transfer rate: | 1 Gbit/s |
Protocols: | |
Management protocols: | SNMP 1, RMON 2, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS |
Switching protocols: | Ethernet |
Data link protocols: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
Safety: | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
Electromagnetic compatibility: | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | ARM |
Processor frequency: | 333 MHz |
Internal memory: | 128 MB |
Flash memory: | 128 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 59.8 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Weight & dimensions: | |
Width: | 260.1 mm |
Depth: | 442 mm |
Height: | 43.2 mm |
Weight: | 3.08 kg |
Other features: | |
Management platform: | IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
Latency: | 5 µs |
Connectivity technology: | Wired |
HP H3C 5800-24G (4Ports x10Gb) Switch
JC100A
Regular price $825.00 $948.75 incl GST Save $-825.00
- Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR. Integrated network services: with support for open application architecture (OAA) modules, extends and integrates application capability into the network. Ring Resiliency Protection Protocol (RRPP): provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as VOIP.
- Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI). IEEE 802.1ab LLDP discovery: advertises and receives management information from adjacent devices on a network. USB support: File copy: allows users to copy switch files to and from a USB flash drive. DHCP options: - DNS Relay and SMTP Redirection. - DHCP: Server (RFC 2131), Client, and Option-82 Relay (RFC 3046). sFlow: provides scalable, ASIC-based, networkmonitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes.
- High-density port connectivity: supports up to 84 1-Gigabit ports per unit/612 per stack. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports. Jumbo frames: on Gigabit Ethernet and 10-Gigabit ports, they allow high-performance remote backup and disaster recovery services. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. Medium Power over Ethernet (PoE): supports a medium Power over Ethernet (PoE) power supply, with each port providing up to 30 W of output power.
- Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high levels of security and ease of administration without impacting network performance. Unique Flex-Chassis Architecture: supports the best of both fixed chassis and modular configurations.
- Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI). Web interface: allows configuration of the switch from any Web browser on the network. RMON and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Multiple configuration files: allow multiple configuration files to be stored to a flash image. Troubleshooting: Ingress and egress port monitoring: enable network problem solving. Tracert and Ping: enable testing of network connectivity. Virtual Cable Tests: provide visibility to cable problems.
- GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. 32K MAC addresses: provide access to many Layer 2 devices. 4,094 port-based VLANs: provide security between workgroups. IEEE 802.1ad QinQ and Selective QinQ: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network. Gigabit Ethernet port aggregation: allows grouping of ports to increase overall data throughput to a remote device.
Specs | |
Management features: | |
Switch layer: | L3 |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
SFP/SFP+ slots quantity: | 4 |
SFP+ module slots quantity: | 4 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u |
10G support: | ✓ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
IP routing: | ✓ |
Flow control support: | ✓ |
Broadcast storm control: | ✓ |
Auto MDI/MDI-X: | ✓ |
Data transmission: | |
MAC address table: | 32000 entries |
Switching capacity: | 208 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 155 mpps |
Packet buffer memory: | 4 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Protocols: | |
Management protocols: | IMC, SNMP, Telnet, HTTPS, RMON1, FTP |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✗ |
Product colour: | Black |
Form factor: | 1U |
LED indicators: | ✓ |
Safety: | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance |
Electromagnetic compatibility: | VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A |
Certification: | RoHs |
Performance: | |
Memory type: | SDRAM |
Internal memory: | 512 MB |
Flash memory: | 512 MB |
Noise level: | 52.9 dB |
Power: | |
Power consumption (typical): | 15.4 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Operating relative humidity (H-H): | 10 - 90% |
Heat dissipation: | 358 BTU/h |
Weight & dimensions: | |
Weight: | 6 kg |
Other features: | |
Latency: | 4.02 µs |
Dimensions (WxDxH): | 467 x 440 x 43.6 mm |
Power supply type: | AC |
Networking features: | Gigabit Ethernet |
Wi-Fi: | ✓ |
Power LED: | ✓ |
Input frequency: | 50 / 60 Hz |
Input voltage: | 100 - 240 V |
Expansion slots: | 4x SFP + 1 Exp sl |
Weight (imperial): | 6 kg (13.2 lbs) |
Dimensions (W x D x H) (imperial): | 364.5 x 439.9 x 43.7 mm (14.3 x 17.3 x 1.72") |
HP 300W AC Power Supply for A5800 Switch
JC087A
Regular price $450.00 $517.50 incl GST Save $-450.00HP 2530-24 24prt 100MbE + 2/2 1GbE SFP Switch
J9782A
Regular price $150.00 $172.50 incl GST Save $-150.00The HP 2530 Switch Series offers uplink flexibility with four Gigabit Ethernet uplinks on all 24- and 48-port models. Gigabit Ethernet uplinks are four small form-factor pluggable (SFP) slots for fiber connectivity on the 24- and 48-port Gigabit Ethernet models.
The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fanless 8-port switches offer additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports.
For customers implementing Power over Ethernet for voice, video, or wireless deployments, the HP 2530 PoE+ switches are IEEE 802.3af and IEEE 802.3at compliant with up to 30 W per port. The switch series is easy to use, deploy, and manage via SNMP, CLI, and Web GUI.
It offers flexible wall, table, and rack mounting; quiet operation with fanless and variable speed fan models; and improved power savings, with features such as IEEE 802.3 az (Energy Efficient Ethernet). These switches include a lifetime warranty, as well as all software releases and technical phone support.
Features
Quality of Service (QoS)
- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
- Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
- Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Management
- Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
- Virtual stacking: provides single IP address management for up to 16 switches
- sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications
- Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Connectivity
- IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
- IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
- Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
- Pre-standard PoE support: detects and provides power to pre-standard PoE devices
Layer 2 switching
- VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
- Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed
- 16K MAC address table: provides access to many Layer 2 devices
- GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
- Per-VLAN Spanning Tree Plus (PVST+): allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple VLANs
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Fast Ethernet (10/100) |
Installed SFP modules quantity: | 2 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
10G support: | ✗ |
Copper ethernet cabling technology: | 100BASE-TX,10BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
VLAN support: | ✓ |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 12.8 Gbit/s |
Throughput: | 9.5 Mpps |
Latency (10-100 Mbps): | 1.7 µs |
Latency (1 Gbps): | 1.1 µs |
Jumbo frames support: | ✓ |
Packet buffer memory: | 1.5 MB |
Security: | |
DHCP features: | DHCP client |
Access Control List (ACL): | ✓ |
SSH/SSL support: | ✓ |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Performance: | |
Virtual stacking (units): | 16 |
Built-in processor: | ✓ |
Processor frequency: | 800 MHz |
Memory type: | DDR3-SDRAM |
Internal memory: | 256 MB |
Flash memory: | 128 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 14.7 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 90% |
Heat dissipation: | 50 BTU/h |
Weight & dimensions: | |
Width: | 442 mm |
Depth: | 246.4 mm |
Height: | 44.5 mm |
Weight: | 2.59 kg |
HP Hewlett Packard Enterprise Aruba 2530-24G Managed L2 Gigabit Ethernet (10/100/1000) Gray 1U Switch
J9776A
Regular price $320.00 $368.00 incl GST Save $-320.00The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
- The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments.
- Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, and IPv6 host support.
- Right size deployment with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, optional PoE+, and optional 10GbE uplinks.
- Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
- Delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.
Security and Quality of Service (QoS)
- The Aruba 2530 Switch Series supports flexible authentication methods including Local MAC, 802.1X, and MAC and Web for greater policy-driven application security.
- Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, enhance security. Flexible traffic controls include ACLs and QoS.
- Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues using weighted deficit round robin (WDRR) or strict priority (SP).
- Defend your IPv6 network with DHCPv6 Protection.
Simple Deployment and Management
- The Aruba 2530 Switch Series supports a choice of management interfaces with Web GUI, command-line interface (CLI), and SNMP with either console or micro USB ports.
- Quiet operation with fanless and variable speed fan models.
- Flexible deployment with wall, table, and rack mounting options.
- TR-069 delivers zero touch deployment for devices with dynamic IP addresses and on private networks.
Single View of the Network
- The Aruba 2530 Switch Series supports ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
- Supports Airwave Network Management software to provide common platform for Zero-Touch Provisioning management, and monitoring for wired and wireless network devices.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
10G support: | ✗ |
Copper ethernet cabling technology: | 10BASE-T,100BASE-TX,1000BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
VLAN support: | ✓ |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 56 Gbit/s |
Throughput: | 41.6 Mpps |
Latency (10-100 Mbps): | 7.4 µs |
Latency (1 Gbps): | 2.3 µs |
Jumbo frames support: | ✓ |
Packet buffer memory: | 1.5 MB |
Security: | |
DHCP features: | DHCP server |
Access Control List (ACL): | ✓ |
SSH/SSL support: | ✓ |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Performance: | |
Virtual stacking (units): | 16 |
Built-in processor: | ✓ |
Processor frequency: | 800 MHz |
Memory type: | DDR3-SDRAM |
Internal memory: | 256 MB |
Flash memory: | 128 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 48 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 90% |
Heat dissipation: | 164 BTU/h |
Weight & dimensions: | |
Width: | 443 mm |
Depth: | 254 mm |
Height: | 44.5 mm |
Weight: | 2.77 kg |
HP - 2620-48 SWITCH SWITCH - 48 PORTS - L4 - MANAGED
J9626-60001
Regular price $170.00 $195.50 incl GST Save $-170.00HP 2530-48G 48+4 SFP 1GbE Switch J9775A
J9775A
Regular price $550.00 $632.50 incl GST Save $-550.00The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
- The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments.
- Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, and IPv6 host support.
- Right size deployment with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, optional PoE+, and optional 10GbE uplinks.
- Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
- Delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.
Security and Quality of Service (QoS)
- The Aruba 2530 Switch Series supports flexible authentication methods including Local MAC, 802.1X, and MAC and Web for greater policy-driven application security.
- Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, enhance security. Flexible traffic controls include ACLs and QoS.
- Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues using weighted deficit round robin (WDRR) or strict priority (SP).
- Defend your IPv6 network with DHCPv6 Protection.
Simple Deployment and Management
- The Aruba 2530 Switch Series supports a choice of management interfaces with Web GUI, command-line interface (CLI), and SNMP with either console or micro USB ports.
- Quiet operation with fanless and variable speed fan models.
- Flexible deployment with wall, table, and rack mounting options.
- TR-069 delivers zero touch deployment for devices with dynamic IP addresses and on private networks.
Single View of the Network
- The Aruba 2530 Switch Series supports ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
- Supports Airwave Network Management software to provide common platform for Zero-Touch Provisioning management, and monitoring for wired and wireless network devices.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L2 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity: | 4 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
10G support: | ✗ |
Copper ethernet cabling technology: | 10BASE-T,100BASE-TX,1000BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
VLAN support: | ✓ |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 104 Gbit/s |
Throughput: | 77.3 Mpps |
Latency (10-100 Mbps): | 7.4 µs |
Latency (1 Gbps): | 2.3 µs |
Jumbo frames support: | ✓ |
Packet buffer memory: | 3 MB |
Security: | |
DHCP features: | DHCP server |
Access Control List (ACL): | ✓ |
SSH/SSL support: | ✓ |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Performance: | |
Virtual stacking (units): | 16 |
Built-in processor: | ✓ |
Processor frequency: | 800 MHz |
Memory type: | DDR3-SDRAM |
Internal memory: | 256 MB |
Flash memory: | 128 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 59.5 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 90% |
Heat dissipation: | 203 BTU/h |
Weight & dimensions: | |
Width: | 443 mm |
Depth: | 254 mm |
Height: | 44.5 mm |
Weight: | 3.08 kg |
HP 2920-24G 24/4 SFP 1GbE Switch
J9726A
Regular price $300.00 $345.00 incl GST Save $-300.00The HP 2920 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) software for a single view of your entire network and is ready for the Software-defined Network (SDN) with OpenFlow support.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
10G support: | ✓ |
Copper ethernet cabling technology: | 10BASE-T,100BASE-TX,1000BASE-T |
Full duplex: | ✓ |
IP routing: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Auto-sensing: | ✓ |
VLAN support: | ✓ |
Optical fiber: | |
Switching optical modules type: | 40 Gigabit Ethernet |
Data transmission: | |
MAC address table: | 16000 entries |
Switching capacity: | 128 Gbit/s |
Throughput: | 95.2 Mpps |
Latency (10-100 Mbps): | 9 µs |
Latency (1 Gbps): | 3.3 µs |
Latency (10 Gbps): | 3.3 µs |
Packet buffer memory: | 11.25 MB |
Security: | |
DHCP features: | DHCP server |
Access Control List (ACL): | ✓ |
IGMP snooping: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Form factor: | 1U |
Performance: | |
Virtual stacking (units): | 4 |
Built-in processor: | ✓ |
Processor model: | ARM11 |
Processor frequency: | 625 MHz |
Memory type: | SDRAM |
Internal memory: | 512 MB |
Flash memory: | 1024 MB |
Power: | |
Power supply included: | ✓ |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (typical): | 58 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 95% |
Heat dissipation: | 198 BTU/h |
Weight & dimensions: | |
Width: | 442.5 mm |
Depth: | 336 mm |
Height: | 44.5 mm |
Weight: | 5.25 kg |
HP ProCurve Switch 2600-8-PWR 8x port
J8762A
Regular price $275.00 $316.25 incl GST Save $-275.00HP 3800-24G-2SFP+ SWITCH
J9575A
Regular price $1,135.00 $1,305.25 incl GST Save $-1,135.00with either SFP+ or 10GBASE-T uplinks, and a 24-portSFP switch with 2 SFP+ uplinks. HP 3800 Series Switches utilize the latest HP ProVision ASIC technology and combine the latest advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry.
The 3800 series implements meshed stacking technology to deliver chassis-like resiliency in a flexible stackable form factor.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Quality of Service (QoS) support: | ✓ |
Web-based management: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Gigabit Ethernet (copper) ports quantity: | 24 |
SFP/SFP+ slots quantity: | 2 |
SFP+ module slots quantity: | 2 |
Console port: | RJ-45 |
ExpressCard slot: | ✗ |
Network: | |
Networking standards: | IEEE 802.1ab,IEEE 802.1D,IEEE 802.1p,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u |
10G support: | ✓ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-TX,10BASE-T |
Port mirroring: | ✓ |
Full duplex: | ✓ |
IP routing: | ✓ |
Routing entries: | 10000 |
Link aggregation: | ✓ |
Rate limiting: | ✓ |
Auto MDI/MDI-X: | ✓ |
Spanning tree protocol: | ✓ |
Number of VLANs: | 2048 |
Data transmission: | |
MAC address table: | 65500 entries |
Switching capacity: | 88 Gbit/s |
Supported data transfer rates: | 10/100/1000 Mbps |
Throughput: | 65400000 pps |
Number of trunks: | 24 |
Maximum data transfer rate: | 10000 Gbit/s |
Jumbo frames support: | ✓ |
Packet buffer memory: | 18 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Access Control List (ACL): | ✓ |
IGMP snooping: | ✓ |
Security algorithms: | 802.1x RADIUS,SSH,SSL/TLS |
Static port security: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMP v3 |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Grey |
Safety: | EN 60950/IEC 60950, UL 60950, CAN/CSA 22.2 No. 60950, EN 60825 |
Certification: | FCC Class A; VCCI Class A; EN 55022/CISPR 22\nClass A\n80 PLUS GOLD\nEN 55024, CISPR 24, IEC 61000-4-2/3/4/5/6/8/11, IEC 61000-3-2/3, EN 61000-3-2/3 |
Performance: | |
Built-in processor: | ✓ |
Memory type: | SDRAM |
Internal memory: | 2048 MB |
Flash memory: | 4096 MB |
Noise level: | 36 dB |
Firmware upgradeable: | ✓ |
Power: | |
Redundant power supply (RPS) support: | ✓ |
Number of power supply units: | 1 |
Input current: | 3 - 6 A |
Power consumption (typical): | 127 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Heat dissipation: | 434 BTU/h |
Weight & dimensions: | |
Weight: | 6.92 kg |
Other features: | |
Management platform: | SNMP, Telnet, Web |
Latency: | 1.9µs |
Dimensions (WxDxH): | 467.4 x 442.7 x 43.2 mm |
Connectivity technology: | Wired |
Power supply: | 400 W |
Power supply type: | HP X311 |
Diagnostics: | LLDP |
Networking features: | Gigabit Ethernet, 10G Ethernet |
Security features: | CLI, GUI, MIB |
Authentication method: | IEEE 802.1X, RADIUS, MAC |
Wi-Fi: | ✗ |
Mounting: | 1U |
Remote administration: | CLI (Console/Telnet/SSH) |
Input frequency: | 50 - 60 Hz |
Input voltage: | 100 - 240 V |
HP Hewlett Packard Enterprise ProCurve 1810G-24 Managed Gigabit Ethernet (10/100/1000) Black Switch
J9450A
Regular price $290.00 $333.50 incl GST Save $-290.00Specs | |
Management features: | |
Switch type: | Managed |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Combo SFP ports quantity: | 2 |
Console port: | RJ-45 |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Full duplex: | ✓ |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 48 Gbit/s |
Throughput: | 35.7 Mpps |
Latency (10-100 Mbps): | 7.4 µs |
Latency (1 Gbps): | 3 µs |
Packet buffer memory: | 0.5 MB |
Design: | |
Rack mounting: | ✓ |
Product colour: | Black |
Safety: | CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 |
Electromagnetic compatibility: | FCC Rules Part 15, Subpart B Class A; EN 55022; VCCI; ICES-003 (Canada) |
Performance: | |
Memory type: | SDRAM |
Internal memory: | 16 MB |
Flash memory: | 8 MB |
Power: | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Input current: | 0.7 A |
Output power: | 30 W |
Power consumption (typical): | 30 W |
Operational conditions: | |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 90% |
Heat dissipation: | 102 BTU/h |
Weight & dimensions: | |
Width: | 442.5 mm |
Depth: | 171.2 mm |
Height: | 43.9 mm |
Weight: | 1.96 kg |
Other features: | |
Dimensions (WxDxH): | 442.5 x 171.2 x 43.9 mm |
Power availability: | 0.7 W |
HP ProCurve 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module compatible with 5400R zl2, 5400 zl, and 8200 zl switches
J9536A
Regular price $860.00 $989.00 incl GST Save $-860.00Specs | |
Network: | |
Ethernet interface type: | Gigabit Ethernet |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
Auto MDIX IEEE: | ✓ |
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
Optical fiber: | |
Fiber optic connector: | SFP+ |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 20 |
SFP+ module slots quantity: | 2 |
Power: | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 55 °C |
Weight & dimensions: | |
Dimensions (WxDxH): | 261.6 x 206.5 x 44.5 mm |
Weight: | 950 g |
Other features: | |
SFP/SFP+ slots quantity: | 2 |
HP ProCurve Switch 2650 (J4899A)
J4899A
Regular price $125.00 $143.75 incl GST Save $-125.00HP ProCurve 2510-24G 24/4 SFP 1GbE Switch
J9279A
Regular price $90.00 $103.50 incl GST Save $-90.00
Feature
|
Description
|
---|---|
Processor and memory
|
MIPS @ 264 MHz, 16MB flash, 64MB SDRAM, packet buffer size: 0.75MB
|
Performance
|
|
Ports
|
|
Mounting
|
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
|
HP Procurve 6600-24G-4xg Switch
J9264A
Regular price $550.00 $632.50 incl GST Save $-550.00Specs | |
Management features: | |
Switch type: | Managed |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Console port: | RS-232 |
Network: | |
Full duplex: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Data transmission: | |
MAC address table: | 10000 entries |
Throughput: | up to 75.7 million pps (64-byte packets) |
Maximum data transfer rate: | 1 Gbit/s |
Security: | |
DHCP features: | DHCP client |
IGMP snooping: | ✓ |
Protocols: | |
Supported network protocols: | RFC 1591 DNS (client); HTML and telnet management; IEEE 802.1ad Q-in-Q (Premium License); IEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1s Multiple Spanning Trees; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; UDLD (Uni-directional Link Detection); RFC 826 ARP; RFC 854 TELNET; RFC 868 Time Protocol; RFC 951 BOOTP; RFC 1058 RIPv1; RFC 1350 TFTP Protocol (revision 2); RFC 1519 CIDR; RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 2453 RIPv2; RFC 2548 (MS-RAS-Vendor only); RFC 3046 DHCP Relay Agent Information Option; RFC 3576 Ext to RADIUS (CoA only); RFC 3768 VRRP; RFC 4675 RADIUS VLAN & Priority; RFC 3376 IGMPv3 (host joins only); RFC 3973 Draft 2 PIM Dense Mode (Premium License); RFC 4601 Draft 10 PIM Sparse Mode (Premium License); RFC 1981 IPv6 Path MTU Discovery; RFC 2460 IPv6 Specification; RFC 2710 Multicast Listener Discovery (MLD) for IPv6; RFC 2925 Remote Operations MIB (Ping only); RFC 3019 MLDv1 MIB; RFC 3315 DHCPv6 (client only); RFC 3513 IPv6 Addressing Architecture; RFC 3596 DNS Extension for IPv6; RFC 3810 MLDv2 (host joins only); RFC 4022 MIB for TCP; RFC 4113 MIB for UDP; RFC 4251 SSHv6 Architecture; RFC 4252 SSHv6 Authentication; \nRFC 4253 SSHv6 Transport Layer; RFC 4254 SSHv6 Connection; RFC 4293 MIB for IP; RFC 4419 Key Exchange for SSH; RFC 4443 ICMPv6; \nRFC 4541 IGMP & MLD Snooping Switch; RFC 4861 IPv6 Neighbor Discovery; RFC 4862 IPv6 Stateless Address Auto-configuration; RFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 1724 RIPv2 MIB; RFC 1850 OSPFv2 MIB; RFC 2021 RMONv2 MIB; RFC 2096 IP Forwarding Table MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2787 VRRP MIB; RFC 2863 The Interfaces Group MIB; RFC 2925 Ping MIB; RFC 2328 OSPFv2 (Premium License); RFC 3101 OSPF NSSA; RFC 2474 DiffServ Precedence, including 8 queues/port; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF); IEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; RFC 2865 RADIUS (client only); RFC 2866 RADIUS Accounting. |
Supported protocols: | RFC 1591 DNS (client); HTML and telnet management\nRFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 1724 RIPv2 MIB; RFC 1850 OSPFv2 MIB; RFC 2021 RMONv2 MIB; RFC 2096 IP Forwarding Table MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2787 VRRP MIB; RFC 2863 The Interfaces Group MIB; RFC 2925 Ping MIB\nMIBs\nIP multicast\nIEEE 802.1ad Q-in-Q (Premium License); IEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1s Multiple Spanning Trees; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; UDLD (Uni-directional Link Detection); RFC 826 ARP; RFC 854 TELNET; RFC 868 Time Protocol; RFC 951 BOOTP; RFC 1058 RIPv1; RFC 1350 TFTP Protocol (revision 2); RFC 1519 CIDR; RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 2453 RIPv2; RFC 2548 (MS-RAS-Vendor only); RFC 3046 DHCP Relay Agent Information Option; RFC 3576 Ext to RADIUS (CoA only); RFC 3768 VRRP (Premium License); RFC 4675 RADIUS VLAN & Priority\nRFC 1981 IPv6 Path MTU Discovery; RFC 2460 IPv6 Specification; RFC 2461 IPv6 Neighbor Discovery; RFC 2462 IPv6 Stateless Address Auto-configuration; RFC 2463 ICMPv6; RFC 2710 Multicast Listener Discovery (MLD) for IPv6; RFC 2925 Remote Operations MIB (Ping only); RFC 3019 MLDv1 MIB; RFC 3315 DHCPv6 (client only); RFC 3513 IPv6 Addressing Architecture; RFC 3596 DNS Extension for IPv6; RFC 3810 MLDv2 (host joins only); RFC 4022 MIB for TCP; RFC 4113 MIB for UDP; RFC 4251 SSHv6 Architecture; RFC 4252 SSHv6 Authentication; RFC 4253 SSHv6 Transport Layer; RFC 4254 SSHv6 Connection; RFC 4293 MIB for IP; RFC 4419 Key Exchange for SSH; RFC 4541 IGMP & MLD Snooping Switch\nIEEE 802.1AB Link Layer Discovery Protocol (LLDP); RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); RFC 3176 sFlow; ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3; XRMON\nNetwork management\nGeneral protocols\nSecurity\nIEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; RFC 2865 RADIUS (client only); RFC 2866 RADIUS Accounting; Secure Sockets Layer (SSL); SSHv2 Secure Shell\nIPv6\nDevice management\nOSPF\nRFC 2474 DiffServ Precedence, including 8 queues/port; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF)\nRFC 2328 OSPFv2 (Premium License); RFC 3101 OSPF NSSA\nRFC 3376 IGMPv3 (host joins only); RFC 3973 Draft 2 PIM Dense Mode (Premium License); RFC 4601 Draft 10 PIM Sparse Mode (Premium License) |
Design: | |
Stackable: | ✓ |
Safety: | CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 |
Electromagnetic compatibility: | FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A |
Performance: | |
Built-in processor: | ✓ |
Processor model: | PowerPC MPC8540 |
Processor frequency: | 666 MHz |
Internal memory: | 256 MB |
Flash memory: | 256 MB |
Power: | |
Power consumption (typical): | 204.3 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 5 - 40 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating temperature (T-T): | 41 - 104 °F |
Weight & dimensions: | |
Weight: | 7.8 kg |
Other features: | |
Management platform: | HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu |
Latency: | 1000 Mb Latency: < 3.4 µs (FIFO 64-byte packets); 10 Gbps Latency: < 2.4 µs (FIFO 64-byte packets) |
Dimensions (WxDxH): | 546.1 x 442.5 x 43.2 mm |
Connectivity technology: | Wired |
Memory and processor: | : Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, packet buffer size: 36 MB QDR SDRAM total (18 MB for 1-GbE & 10-GbE ports), 256 MB compact flash, 256 MB DDR SDRAM |
Power requirements: | 100 -120 VAC / 200 -240 VAC; 50 /60 Hz.\nThe switch automatically adjusts to any voltage between 100-120 and 200-240 volts and either 50 or 60 Hz |
Power supply type: | 1 x J9269A |
Mounting: | Telco rack: Mounts in an EIA-standard 19-in. 2-post telco rack or equipment cabinet; horizontal surface mounting only. Rack kit: Rack rails are required for mounting in HP 10000 Series 4-post racks. |
Remote administration: | command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C) |
Input frequency: | 50 / 60 Hz |
Input voltage: | 100-120 / 200-240 VAC |
I/O ports: | 20 auto-sensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Media Type: Auto-MDIX, Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; 4 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers); 4 SFP+ 10-GbE ports, Duplex: full only; 1 RS-232C DB-9 console port |
Electromagnetic emissions: | FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A. |
Electromagnetic immunity: | EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3 |
Management product name: | HP ProCurve Manager Plus; HP ProCurve Manager (included) |
Weight (imperial): | 17.2 lb. |
Operating altitude (imperial): | up to 10000 ft. |
Power supply slots open: | 2 |
Switch fabric speed: | 105.6 Gbps |
HP ProCurve Switch 2610-48-PPoE 10/100 (+ 2P SFP/Gbit)
J9089A
Regular price $250.00 $287.50 incl GST Save $-250.00The HP 2610 Switch Series consists of five switches. The HP 2610-24 and 2610-48 Switches provide 24 and 48 ports of 10/100 connectivity. The HP 2610-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces. The HP 2610-24-PPoE, 2610-24-PoE, and 2610-48-PoE Switches are IEEE 802.3af compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The 2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All series switches include two 10/100/1000BASE-T ports and two mini-GBIC slots for Gigabit Ethernet uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the HP 2610 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers. Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to four queues.
- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support. Gigabit uplink connectivity: two 10/100/1000BASE-T ports and two mini-GBIC ports for connectivity such as Gigabit Ethernet (SX, LX, LH, and 1000BASE-T) and 100BASE-FX. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports. Jumbo packet support: supports up to 9216-byte frame size to improve performance of large data transfers.
- IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk. IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w. Optional redundant power supply: provides uninterrupted power (provided by HP 600 RPS/EPS).
- RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices. Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator's login; also provides an audit trail. Multiple configuration files: allow multiple configuration files to be stored to a flash image. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading.
- VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously. GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs. IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs.
- Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes, including one default route, in IP networks.
Specs | |
Management features: | |
Switch type: | Managed |
Switch layer: | L3 |
Web-based management: | ✓ |
MIB support: | ✓ |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 48 |
Gigabit Ethernet (copper) ports quantity: | 2 |
SFP/SFP+ slots quantity: | 2 |
SFP module slots quantity: | 2 |
Console port: | RJ-45 |
Power connector: | DC-in jack |
Network: | |
Networking standards: | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1v,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x |
10G support: | ✗ |
Copper ethernet cabling technology: | 1000BASE-T,100BASE-T,100BASE-TX,10BASE-T |
Full duplex: | ✓ |
IP routing: | ✓ |
Flow control support: | ✓ |
Link aggregation: | ✓ |
Auto MDI/MDI-X: | ✓ |
Ethernet LAN data rates: | 10,100 Mbit/s |
Data transmission: | |
MAC address table: | 8000 entries |
Switching capacity: | 17.6 Gbit/s |
Supported data transfer rates: | 10/100 Mbps |
Throughput: | 13 Mpps |
Store-and-forward: | ✓ |
Maximum data transfer rate: | 0.1 Gbit/s |
Packet buffer memory: | 2 MB |
Security: | |
DHCP features: | DHCP server,DHCP client |
Security algorithms: | 802.1x RADIUS,SSH,SSL/TLS |
MAC address filtering: | ✓ |
SSH/SSL support: | ✓ |
Multicast features: | |
Multicast support: | ✓ |
Protocols: | |
Management protocols: | SNMP v1/2/3 |
Supported network protocols: | , BOOTP, Telnet, ARP, TCP, SNTP, ICMP, TFTP, UDP |
Design: | |
Rack mounting: | ✓ |
Stackable: | ✓ |
Product colour: | Black |
Form factor: | 1U |
LED indicators: | ✓ |
Safety: | CSA, UL, IEC, EN |
Certification: | FCC, VCCI, EN, CISPR, IEC |
Performance: | |
Built-in processor: | ✓ |
Processor model: | MIPS |
Processor frequency: | 300 MHz |
Memory type: | SDRAM |
Internal memory: | 128 MB |
Flash memory: | 16 MB |
Noise level: | 63.6 dB |
Power: | |
Redundant power supply (RPS) support: | ✗ |
Number of power supply units: | 1 |
Input current: | 3.5 A |
Power consumption (typical): | 590 W |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✓ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 50 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 90% |
Operating altitude: | 0 - 3000 m |
Heat dissipation: | 2281 BTU/h |
Weight & dimensions: | |
Weight: | 7.58 kg |
Other features: | |
Latency: | 4.4 - 6.2 µs |
Data transfer rate: | 100 Mbit/s |
Dimensions (WxDxH): | 442 x 342.9 x 43.9 mm |
Connectivity technology: | Wired |
Power supply type: | AC/DC |
Networking features: | Fast Ethernet |
Wi-Fi: | ✗ |
Power LED: | ✓ |
Input frequency: | 50 - 60 Hz |
Input voltage: | 100 - 240 V |
Ethernet LAN: | ✓ |
Cabling technology: | 10/100/1000Base-T(X) |
Acoustic pressure emissions: | 56.6 dB |
Connectivity LEDs: | ✓ |
J9020-60101 HP ProCurve 2510-48 Switch 48-Ports Fast Ethernet 100Base-T 2x1000Base-T 2xSFP (mini-GBIC) Slots 1U Manage Ethernet Switch
J9020A-60101
Regular price $295.00 $339.25 incl GST Save $-295.00PROCURVE NETWORKING SWITCH 2650 PWR
J8165A
Regular price $175.00 $201.25 incl GST Save $-175.00HP ProCurve Switch 2650 (J4899B)
J4899B
Regular price $150.00 $172.50 incl GST Save $-150.00Features
HP PROCURVE SWITCH 2626 - 24P 10/100M
J4900B
Regular price $50.00 $57.50 incl GST Save $-50.00HP E5406 zl switch w/ Mgmt Module (PN:J87726A), 2x PSU (PN: J9306A)
J8697A
Regular price $350.00 $402.50 incl GST Save $-350.00Communications:
RFC 783 TFTP; RFC 2925 Ping MIB; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol; IEEE 802.3x Flow Control; DHCP Relay; RFC 3046 DHCP Relay Agent Information Option 82; RFC 3376 IGMPv1/v2/v3; RFC 2453 RIPv2; RFC 2328 OSPFv2 (Premium Edge License); IGMPv3; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.1s Multiple Spanning Trees; IEEE 802.3ad Link Aggregation Control Protocol; IEEE 802.1AB Link Layer Discovery Protocol; ANSI/TIA-1057 LLDP Media Endpoint Discovery (MED); RFC 2474 DiffServ Precedence; RFC 2597 DiffServ Expedited Forwarding (EF); RFC 2598 DiffServ Assured Forwarding (AF); RFC 1492 TACACS+; RFC 2138 RADIUS; RFC 2866 RADIUS accounting; SSHv2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; 802.3af Power over Ethernet; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP; IEEE 802.1p Priority; SNMPv1/v2c/v3; HTML and telnet management; RFC 1493 Bridge MIB; PIM Dense Mode (Premium Edge License); PIM Sparse Mode (Premium Edge License); RFC 1213 MIB II; RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 3768 VRRP (Premium Edge License); RFC 2787 VRRP MIB; RFC 1058 RIP; RFC 1724 RIPv2 MIB; RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); XRMON; UDLD (Uni-directional Link Detection); RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 1850 OSPF MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 3101 OSPF NSSA; RFC 1519 CIDR; RFC 3046 DHCP Relay Agent Information Option; RFC 3176 sFlow
Specs | |
Management features: | |
Switch type: | Managed |
Ports & interfaces: | |
Basic switching RJ-45 Ethernet ports quantity: | 6 |
Console port: | RS-232 |
Data transmission: | |
MAC address table: | 10000 entries |
Throughput: | up to 240.2 million pps |
Maximum data transfer rate: | 10 Gbit/s |
Protocols: | |
Supported network protocols: | RFC 783 TFTP; RFC 2925 Ping MIB; RFC 951 BootP; RFC 1542 BootP; RFC 854 Telnet; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 Simple Network Time Protocol; IEEE 802.3x Flow Control; DHCP Relay; RFC 3046 DHCP Relay Agent Information Option 82; RFC 3376 IGMPv1/v2/v3; RFC 2453 RIPv2; RFC 2328 OSPFv2 (Premium Edge License); IGMPv3; IEEE 802.1D Spanning Tree; IEEE 802.1w Rapid Convergence Spanning Tree; IEEE 802.1s Multiple Spanning Trees; IEEE 802.3ad Link Aggregation Control Protocol; IEEE 802.1AB Link Layer Discovery Protocol; ANSI/TIA-1057 LLDP Media Endpoint Discovery (MED); RFC 2474 DiffServ Precedence; RFC 2597 DiffServ Expedited Forwarding (EF); RFC 2598 DiffServ Assured Forwarding (AF); RFC 1492 TACACS+; RFC 2138 RADIUS; RFC 2866 RADIUS accounting; SSHv2 Secure Shell; Secure Sockets Layer (SSL); IEEE 802.1X Network Login; 802.3af Power over Ethernet; IEEE 802.1Q VLAN tagging; IEEE 802.1Q GVRP; IEEE 802.1p Priority; SNMPv1/v2c/v3; HTML and telnet management; RFC 1493 Bridge MIB; PIM Dense Mode (Premium Edge License); PIM Sparse Mode (Premium Edge License); RFC 1213 MIB II; RFC 2096 IP Forwarding Table MIB; RFC 2737 Entity MIB; RFC 2863 Evolution of Interface; RFC 2665 Ethernet MIB; RFC 3768 VRRP (Premium Edge License); RFC 2787 VRRP MIB; RFC 1058 RIP; RFC 1724 RIPv2 MIB; RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); XRMON; UDLD (Uni-directional Link Detection); RFC 2021 RMON probe configuration (RMON v2); RFC 2668 802.3 MAU MIB; RFC 2613 SMON; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 1850 OSPF MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 3101 OSPF NSSA; RFC 1519 CIDR; RFC 3046 DHCP Relay Agent Information Option; RFC 3176 sFlow |
Design: | |
Stackable: | ✗ |
Safety: | CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950 |
Electromagnetic compatibility: | FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A |
Power over Ethernet (PoE): | |
Power over Ethernet (PoE): | ✗ |
Operational conditions: | |
Operating temperature (T-T): | 0 - 55 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating temperature (T-T): | 32 - 131 °F |
Weight & dimensions: | |
Weight: | 10.7 kg |
Other features: | |
Management platform: | HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C) |
Latency: | 1000 Mb Latency: < 3.7 µs (FIFO 64-byte packets); 10 Gbps Latency: < 2.1 µs (FIFO 64-byte packets) |
Dimensions (WxDxH): | 450.9 x 444.5 x 175.3 mm |
Connectivity technology: | Wired |
Memory and processor: | Gigabit Module: ARM9 @ 200 MHz, packet buffer size: 144 Mb QDR SDRAM; 10G Module: ARM9 @ 200 MHz, packet buffer size: 36 Mb QDR SDRAM; Management Module: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM |
Power requirements: | 100-127 VAC/200-240 VAC; 50/60 Hz\nChassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.; Power supplies must be ordered separately.\nHeat dissipation does not include heat dissipated by the PoE-powered devices themselves. |
Power supply type: | 1 x J8712A |
Input frequency: | 50 / 60 Hz |
Input voltage: | 100-127 / 200-240 VAC |
Expansion slots: | 6x |
I/O ports: | 6 open module slots; Supports a maximum of 24 10-GbE ports or 144 auto-sensing 10/100/1000 ports or 144 mini-GBICs, or a combination |
Electromagnetic emissions: | FCC Class A; EN55022/CISPR-22 Class A; VCCI Class A |
Electromagnetic immunity: | EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3 |
Weight (imperial): | 15.5 kg (34.3 lbs) |
Operating altitude (imperial): | up to 10000 ft. |
Power supply slots open: | 2 |
Switch fabric speed: | 345.6 Gbps |
HP J4899-60501 J4899C PROCURVE 2650 48+2PORTS SWITCH
J4899C
Regular price $50.00 $57.50 incl GST Save $-50.00Features
HP Procurve Layer 2 Managed Switch 2524
J4813A
Regular price $95.00 $109.25 incl GST Save $-95.00HP StorageWorks 4/32B SAN Switch
AG757A
Regular price $730.00 $839.50 incl GST Save $-730.00Features
HP StorageWorks EVA4400 (HSV300) Dual Controller with w/ 8x 8Gb SFP & 2x 8Gb Embedded Switch (Missing 2x Battery cache Module)
AG805B
Regular price $275.00 $316.25 incl GST Save $-275.00